Quantcast VIDS/MAF WORK REQUEST (DOCUMENTATION COMPLETED)

Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
Custom Search
 
  
BLOCK A22—WORK UNIT CODE. BLOCK A43—TYPE EQUIPMENT CODE. BLOCK A52—BUREAU/SERIAL NUMBER. BLOCK A58—WHEN DISCOVERED CODE. BLOCK A59—TYPE MAINTENANCE CODE. BLOCKS A08 THROUGH A14—JOB CON- TROL NUMBER. BLOCKS E08 THROUGH E42—REMOVED ITEM(S). Enter the manufacturer’s code, part number, removed date, serial number of the removed item(s), and time cycle. If there is more than one serial-numbered item, enter MULTI. If there is no serial number, enter 0. A separate VIDS/MAF work request is required for like items that have different manufacturer’s code/ part numbers. In cases of egress and survival equipment with like part numbers but different manufacturer’s codes, enter five zeroes in the manufacturer’s code block and the time/cycle block using the appropriate prefix. DISCREPANCY BLOCK, Enter descriptive narration, serial numbers if appropriate, MRC numbers if applicable, and signature of the maintenance control supervisor. The VIDS/MAF work request is delivered with the component and/or items to the IMA production control. The IMA production control supervisor signs the VIDS/MAF work request in the corrective action block and returns a signed copy 2 (as proof of turn-in) to the requesting activity. Copy 2 is placed on the maintenance control/phase VIDS board until IMA has completed the check, test, or service action. VIDS/MAF WORK REQUEST (DOCUMENTATION COMPLETED) When the item(s) that have been tested, inspected, or serviced have been reinstalled, the documentation of the VIDS/MAF that has been held in suspense is completed. Refer to figure 4-35 and locate each block as you read about it in this section. BLOCK A32—TRANSACTION Enter 11. BLOCK A34—MAINTENANCE Enter 1. BLOCK A35—ACTION TAKEN Enter S. BLOCK A36—MALFUNCTION CODE. LEVEL. CODE. CODE. Enter the appropriate malfunction code. BLOCK A39—ITEMS PROCESSED. Enter the total number of items processed. BLOCK A41—MAN-HOURS. Enter the total number of man-hours expended for removal and reinstallation. BLOCK A45—ELAPSED MAINTENANCE TIME. Enter the elapsed clock time involved in the removal and reinstallation action. BLOCK B30—COMPLETED DATE. Enter the Julian date on which the work was completed. BLOCK B34—COMPLETED TIME. Enter the actual time work was completed. CORRECTION ACTION BLOCK. Enter Reinstalled after check, test, or service. CORRECTED BY, INSPECTED BY, SUPERVISOR, AND MAINT CONTROL BLOCKS. Enter the appropriate signature and rate. WORK REQUEST, CUSTOMER SERVICES (OPNAV FORM 4790/36A) The work request, customer services form (fig, 4-36) is used by IMA and supply department personnel to request customer services support from depot-level activities. Customer services support is limited to services not involving repairs within the capability of the requesting IMA. The type of assistance required by the IMA may involve the depot-level activity to complete components delayed in process because of a lack of facilities for check and test and/or processing that is not normally required. Heat treatment, 4-58



Aviation News
The A350 XWB embarks on final certification phase
World route proving tour to visit 14 cities Share this...
airbus.com
FAA Statement-FAA Lifts Flight Restrictions for Ben Gurion International Airport
Agency continues to monitor the very fluid situation and will...
faa.gov
FAA Statement-Notice to Airmen Extended for Ben Gurion International Airport
Yesterday's notice is still in effect for up to an...
faa.gov
Hawaiian Airlines to order six A330-800neo aircraft
First U.S. airline to join launch list for new aircraft...
airbus.com
FAA Statement-Notice to Airmen Issued for Ben Gurion International Airport
U.S. airlines prohibited from flying to or from the airport...
faa.gov
A350 XWB MSN001 successfully conducted ‘Maximum Energy Rejected Take-Off’ test
Airbus has successfully performed the ‘Maximum Energy Rejected Take-Off’ (MERTO)...
airbus.com
TTTech Releases Next Generation of its TTP Controller
[Avionics Today July 21, 2014] TTTech has released the third generation...
aviationtoday.com
Exelis to Provide SANG ATM Upgrade
[Avionics Today July 21, 2014] Exelis is providing its GCA-2020...
aviationtoday.com
Ready to board: Airbus issues the latest edition of the “Shaping Efficiency” magazine
Step inside the all-new A350 XWB with Issue no. 6...
airbus.com
FAA Statement on Texas Equusearch UAS Court Decision
US Court of Appeals decides in favor of FAA. Agency...
faa.gov
Airbus’ record Farnborough Airshow sales pace continues…at the “Let’s Shop Airbus” boutique
During the Farnborough Airshow customers are eagerly lining up to...
airbus.com
Airbus expands its global collaboration with a new U.S. manufacturing technology partnership
Airbus’ worldwide network of relationships with suppliers, partners, institutions and...
airbus.com
No place like home: Airbus’ 2014 Farnborough Airshow success highlights its major UK presence
A record-breaking Farnborough Airshow – with more than $75 billion...
airbus.com
BAE Unveils NextGen Helmet Display System
[Avionics Today July 18, 2014] BAE Systems unveiled its next...
aviationtoday.com
IAI Expands Avionics Reach in Brazil
[Avionics Today July 18, 2014] Israel Aerospace Industries’ (IAI) subsidiary...
aviationtoday.com
FAA Statement-Expanded Notice to Airmen Released
U.S. flight operations suspended until further notice over eastern Ukraine....
faa.gov
FAA Statement on Malaysian Air Flight 17
FAA confirms carriers have voluntarily agreed not to operate in...
faa.gov
Industrial partnerships: Airbus selects Rolls-Royce and Aircelle for the A330neo’s engine propulsion system
In addition to Airbus’ busy Farnborough Airshow as a venue...
airbus.com
GE, Barco Partner to Develop Open System Cockpit Display
[Avionics Today July 17, 2014] GE Aviation has entered a...
aviationtoday.com


Privacy Statement - Copyright Information. - Contact Us

comments powered by Disqus

Integrated Publishing, Inc.
9438 US Hwy 19N #311 Port Richey, FL 34668

Phone For Parts Inquiries: (727) 755-3260
Google +