Aircraft tubes, 11-28
identification, 11-28
inspection, 11-28
nonserviceable tubes, 11-29
serviceable tubes, 11-29
tube storage, 11-28
Aircraft wheels, 11-1
remountable flange wheel, 11-1
divided (split) wheel, 11-1
typical wheel assembly, 11-1
Aircraft wheels, tires, and tubes, 11-1
Airframe fuel system, 3-44
Airframe (tripod) jacks, 3-39
Airloc fasteners, 2-8
Alignment check, 9-56
Alignment and adjustment, 12-19
Alignment and operational checks, 9-24
Alignment leveling methods, 9-53
plumb bob and datum plate, 9-55
spirit level, 9-55
transit, 9-55
Alloy steels, 1-22
Alloying of metals, 1-27
Alternating current, 15-8
Aluminum, 1-21
Aluminum alloy tubing, 6-1
Aluminum and aluminum alloys, 1-30
Analysis methods, 4-8
Angle beam, 15-10
Annealing, 15-38, 15-45
Annealing and normalizing, 15-42
Application of sealants, 14-45
sealing compound MIL-S-81733, 14-47
sealing compound MIL-S-8802, 14-47
Arresting gear, 1-14
Arresting gear system, 12-64
arresting hook assembly inspection, 12-64
damper cylinder, 12-66
liquid spring, 12-65
single shank centering devices, 12-65
Arresting hook assembly inspection, 12-64
Assessment of composite material damage, 14-23
Automatic blade folding system, 10-15
automatic blade folding system maintenance,
10-19
blade folding operations, 10-15
blade folding system components, 10-18
blade spreading operations, 10-18
Automatic brake adjuster valve, 12-50
Automatic check valves, 8-16
Autorotation, 10-4
Auxiliary servo cylinder, 10-8
Axle jacks, 3-37
B
Backup rings, 2-35
Backup system, 9-21
Balance, 3-33
Ball-lock actuator, 8-3
Bar folder, 13-16
Barcol tester, 1-39
Bearing maintenance, 11-9
Bench testing, 12-28
Bend allowance, 13-18
Bend allowance formula, 13-20
Bend allowance terms, 13-18
Bending sheet metal, 13-20
bending in a vise, 13-20
bending on a bar folder, 13-23
bending on a brake, 13-22
bending over stakes, 13-20
INDEX-2
