Figure 2-2.-External canopy control switch.
Figure 2-3.-Internal canopy control switch.
is attached to the canopy unlatch thruster,
as shown in figures 2-4 and 2-5.
Canopy Actuator Manual Drive Unit
The canopy actuator manual drive unit is
located in the cockpit under the left canopy
sill. It is used to manually raise and lower the
The internal manual canopy opening handle
is located on the canopy actuator manual drive
unit. The handle is used to operate the drive unit
from inside the cockpit. The opening handle shaft
assembly is located between the canopy actuator
manual drive unit and the canopy actuator. The