• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
TEMPORARY STORAGE AND CUSTODY ASHORE - 14023_485
TRANSACTION REPORTING - 14023_487

Aviation Ordinanceman 2 & 3 - Aviation theories and other practices
Page Navigation
  464    465    466    467    468  469  470    471    472    473    474  
DATA BLOCKS 8 THROUGH 22. Enter the NSN of the item. The NSN can be found in TW010-AA-ORD-010/NAVAIR 11-1-116A. DATA BLOCKS 23 AND 24. Enter the unit of issue. Combatants (such as CVs) should always use the abbreviation RD (rounds) for the unit of issue. DATA BLOCKS 25 THROUGH 29. Enter the quantity that is turned in. DATA BLOCKS 30 THROUGH 43. Enter the local document control number. DATA BLOCKS 55 AND 56. Enter the cognizance symbol of the material. DATA BLOCKS 57 THROUGH 59. Enter one of the Project codes listed in table 17-9. When none of the Project codes listed in table 17-9 fit the reason for turn-in, leave these data blocks blank DATA BLOCKS 74 THROUGH 80. Enter the unit price as listed in TW010-AA-ORD-010/NAVAIR 11-1-116A. DATA BLOCK A. Enter the Service code, UIC, name, and hull number of the ship. Table 17-9.—Project Codes DATA BLOCK B. Enter the Service code, UIC, and the name of the ship or activity (hull number, if applicable) that is to receive the material. DATA BLOCK E. Enter the total extended price by multiplying the unit price by the quantity being shipped. DATA BLOCK P. Enter the appropriate material Condition code. Material condition codes are listed in Conventional Ammunition Integrated Management System (CAIMS), NOCINST 8010.2 (series), chapter I, section 2, attachment C. DATA BLOCK U. Enter the DOT class and CG class. DATA BLOCK V. Enter the lot number and/or serial number, if required. When an air-launch missile is being shipped, the missile serial number and MDD must be entered in this data block. When shipping several missiles, you may have to list the serial numbers and MMDs on a separate sheet of paper and attach it to the reverse side of the DD Form 1348-1. DATA BLOCK W. Enter the DODIC/NALC of the material. A separate DD Form 1348-1 must be used for each DODIC/NALC shipped. DATA BLOCK X. Enter the noun name of the item as listed in TW010-AA-ORD-010/NAVAIR 11-1-116A. DATA BLOCK 2. Enter the type of container used. DATA BLOCK 5. Enter the number of containers. DATA BLOCK AA. Enter the Navy ammunition reclassification (NAR) number or other remarks that explain the reason for turn-in. Immediately upon receipt of a NAR, commands should determine whether stocks on hand include any of the affected lots or types listed on the NAR. Action must be taken to ensure that the use or issue of affected ammunition is consistent with the newly assigned Condition code. When required, package and ship the ammunition as directed by the NAR. Activities are required to make reports regarding NARs. Negative reports are also required. DATA BLOCK BB. Enter either LIVE AMMO or INERT AMMO, as applicable. DATA BLOCK FF. For inert items only, enter CERTIFIED TO BE INERT. DATA BLOCK GG. Enter APPROVED FOR TRANSFER and the name of the person approving the transfer. All turn-ins must be approved for transfer by the signature of the accountable officer or petty officer specified in the activity’s organization and regulations 17-23







Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.