discussed earlier in this chapter with the following
exceptions. The spotting charge receptacles must be
checked to ensure they are clean, free of foreign material
and moisture, and not deformed.
CXU-4/B Spotting Charge
Prepare, inspect, and install the CXU-4/B spotting
charge as follows:
1. Check spotting charge for damage or leakage.
2. Ensure retaining ring and spring washer are
3. Install spring washer at base of spotting charge
4. Slide spotting charge into receptacle and secure
with retaining ring (pliers may be required).
MXU-735 Nose Plug
Inspect and install nose plug as follows:
Figure 13-16.Mk 89 Mod 0 bomb spotting charge adapter.