BRU-33/A BOMB EJECTOR
The BRU-33/A bomb ejector rack (VER) (fig.
10-7) is suspended by the BRU-32/A bomb ejector
rack. It is used to suspend two stores weighing up to
1,000 pounds each by using 14-inch suspension hooks.
The VER features a special safety interlock and
automatic sway bracing. The safety interlock is
electrically controlled by the aircraft and mechanically
prevents accidental opening of the suspension hooks.
Sensing switches are incorporated to indicate to the
SMP that a store is loaded. The rack has provisions for
mechanical and electric fuzing. The ejection unit uses
two cartridges to generate the required gas pressure for
REVIEW NUMBER 2 ANSWERS
The maximum store capacity of the
BRU-11A/A bomb ejector rack is 4,000
The auxiliary release unit provides an
emergency method of release should the
ejector assembly or its electrical system fail.
IMPROVED MULTIPLE EJECTOR RACK
BRU-41/A (IMER) AND IMPROVED TRIPLE
EJECTOR RACK BRU-42/A (ITER)
The BRU-41/A (fig. 10-8) and the BRU-42/A (fig.
10-9) operate and function basically the same. There
are four major subassembliesthe structural adapter
assembly, the electronic control unit, the cable
Figure 10-7.BRU-33/A bomb ejector rack.
Figure 10-8.BRU-41/A IMER.