SUU-25 FLARE DISPENSER
Perform loading and unloading of the dispenser in
authorized areas only.
Install adapter kits on flares as follows:
Make sure the timer knob is on safe.
Make sure there is no external damage.
Check the adapter kit (fig. 13-26) for two green
arming caps with serviceable arming lanyards,
one white two-piece spacer, and four yellow
Rotate the time knob to required setting.
Install yellow sealing ring on each end of flare.
Connect green arming cap lanyard (fig. 13-27)
to timer knob.
Install green cap on yellow sealing ring.
Place the two halves of the white spacer
together and install on the aft end of the
forward flare (fig. 13-28).
Figure 13-27.Lanyard configuration.
Figure 13-28.Installation of spacer assemblies on flares.