Successful completion
You will find NAVAIR 17-1-125 very helpful
of
the
NAESU
because it spells out specifically which materials and
equivalent training.
procedures you are to use to clean up corrosion and
Aviation rating specific "A" school (after 1 April
restore the protective surface.
1992).
Other Sources of Information
The requirement for supervisors in the I-level work
center 92D is one of the above courses in addition to
One of the biggest problems in corrosion
one of the following:
prevention and control is knowing what materials to
Successful completion of Aircraft Corrosion
use, where to find them, and their limitations. Materials
Control Course (N-701-0013).
used should be those covered and controlled by military
specifications. Corrosion prevention and control
Successful completion of Aircraft Corrosion
information pertaining to materials, methods, and
Course (Course C-600-3183).
techniques is scattered throughout many directives and
Individuals actually painting aircraft or support
instructions. The following is a list of sources of
equipment must complete the Aircraft Paint Touch Up
information that should be used as a reference in every
and Markings Course (Course N-701-0014) or Aircraft
unit's technical library and support equipment shop.
Paint/Finish Course (Course C-600-3182) prior to
Although these publications are intended primarily for
painting any equipment. This qualification is valid for
corrosion prevention and control on aircraft and
an unlimited period.
weapons systems, most of the information can also be
used for aviation support equipment.
The publications described in this manual are
subject to periodic revision. Some are changed at
OPNAVINST 4790.2
Naval Aviation Maintenance
regular intervals; others are changed as the need arises.
Program (NAMP)
When using any publication, be sure that you have the
latest edition. When using a publication that is kept
NAVAIR 01-1A-509
Aircraft Weapons Systems
current by changes, make sure that you have a copy
Cleaning and Corrosion Con-
with the latest changes incorporated.
trol
NAVAIR 01-1A-518
Corrosion Prevention Com-
Q1-19.
Which of the following statements defines
pounds for Protection of Naval
corrosion?
Weapons Systems
NAVAIR 07-1-503
Cleaning Materials for Naval
electrochemical process
Weapons Systems Main-
2. Reaction of metals to electrical current
tenance and Overhaul Opera-
tions
4. Reaction of metals to long-term storage
NAVAIR 16-1-540
Avionics Cleaning and Cor-
Q1-20.
In the electrochemical attack of corrosion,
rosion Prevention/Control
which of the following climates is a more
NAVAIR 17-1-125
Ground Support Equipment
serious factor?
Cleaning and Corrosion Con-
1.
Cold
trol
2.
Hot and dry
3.
Wet and humid
TRAINING
4.
Cold and damp
Personnel engaged in support equipment
Q1-21.
What is meant by the term "preservation"?
maintenance must complete one of the following
1. Maintaining cleanliness in support equip-
courses in corrosion control, as required by the NAMP
ment spaces
(Naval Aviation Maintenance Program):
2. Performing preventive maintenance (PM)
Successful completion of the NAMTRAGRU
on equipment
3. Maintaining a dry environment around
Corrosion Control (Basic) (C-600-3180) or
support equipment
Avionics Corrosion Control (C-100-4176).
4. Performing wash/wipe downs on support
equipment
1-14