Front Presser Foot and Presser Pressure-Regulating Thumbscrew

Install the foot on the front presser foot and the regulating screw on the top of the face.

Knee Lifter Lifting Lever

Replace the knee lifter lifting lever so that the slotted end fits over the projection on the knee lifter connection lever. The projection on the curved end of the knee lifter lifting lever fits under the presser bar releasing bracket.

Knee Lifter Lifting Lever Hinge Screw

Align the hole in the knee lifter lifting lever with the corresponding hole in the machine arm; then insert the hinge screw. Make certain the screw, including the shoulder, is fully inserted.

Faceplate

Insert the thumbscrew and secure it.

Arm Cap

Replace the arm cap and the spring washer on the machine arm and screw them in place.

This completes the reassembly of the 111 W 155 sewing machine. It will be necessary to make a few minor adjustments or retime this machine. Timing and adjustment are covered at the beginning of this chapter.