5-42.
The part of a connector that is usually mounted
on a part of the equipment is known as what
unit?
1.
Plug
2.
Terminal
3.
Coupling nut
4.
Receptacle
5-43.
Aircraft wires are fastened to studs by what
means?
1.
Wrapping
2.
Terminal lugs
3.
Bonding
4.
Twisting
5-44.
What does the term "safetying" mean?
1.
Permanently locking all aircraft nuts and
bolts
2.
Checking
the
aircraft
for
structural
weaknesses
3.
Securing aircraft fasteners so they will not
work loose
4.
Thoroughly
inspecting
all
aircraft
fasteners
5-45.
What is the most common method of safety
wiring?
1.
The single-wire, double-twist method
2.
The single-twist method
3.
The clip-locking method
4.
The wire-wrapping method
5-46.
What safety wiring method should be used in
places that are hard to reach?
1.
The single-wire method
2.
The double-wire method
3.
The clip-locking method
4.
The wire-wrapping method
IN ANSWERING QUESTIONS 5-47 THROUGH
5-50, REFER TO FIGURE 5-23 IN THE TEXT.
5-47.
What
examples
in
the
figure
show
a
single-threaded part wired to a housing or lug?
1.
1 and 2
2.
2 and 3
3.
4 and 5
4.
6 and 7
5-48.
What example in the figure shows the correct
way to wire several parts in series?
1.
1
2.
2
3.
3
4.
4
5-49.
What example in the figure shows the proper
way to wire castellated nuts and studs?
1.
1
2.
2
3.
3
4.
4
5-50.
What example in the figure shows the proper
way to safety wire parts in a closely spaced,
closed geometrical pattern with the single-wire
method?
1.
8
2.
7
3.
6
4.
5
5-51.
When six widely spaced bolts are being safety
wired by the double-twist method, what
procedure should you follow?
1.
A group of three should be the maximum
number safety wired in one series
2.
All six should be safety wired in one series
3.
They should be safety wired individually
4.
The number that can be safety wired by a
24-inch length of wire should be the
maximum number in a series
5-52.
When safety wiring closely spaced bolts, what
is the longest wire you can use to safety wire
the most bolts in a series?
1.
30 inch
2.
24 inch
3.
18 inch
4.
12 inch
5-53.
What method is used to safety wire turnbuckles
on modern aircraft?
1.
Single-wire method
2.
Clip-locking method
3.
Double-twist method
4.
Wire-wrapping method
5-54.
What method is used to safety wire turnbuckles
on older types of aircraft?
1.
Clip-locking method
2.
Single-wire method
3.
Double-twist method
4.
Wire-wrapping method
5-24
