9-13.
What class of fire is the Twinned Agent Unit
(TAU-2H) primarily designed to extinguish?
1.
Class A
2.
Class B
3.
Class C
4.
Class D
9-14.
What propels the fire-extinguishing agents on
the Twinned Agent Unit (TAU-2H)?
1.
Carbon dioxide
2.
Oxygen
3.
Compressed air
4.
Nitrogen
9-15.
How many degrees of rotation is provided for
the superstructure on the A/S32M-14 aircraft
maintenance crane?
1.
180°
2.
270°
3.
360°
4.
375°
9-16.
Which of the following activities is tasked with
maintenance of forklifts aboard a naval
station?
1.
Supply department
2.
Base operations
3.
Public works
4.
AIMD
9-17.
When operating the flight deck scrubber, how
do you recover the solution and debris?
1.
Rotating cylindrical brushes
2.
Vacuum recovery system
3.
Rear squeegee
4.
Debris hopper
9-18.
The purpose of servicing equipment is to
provide compressed nitrogen or air, electrical
and hydraulic power, and air-conditioning for
aircraft functions while the aircraft is on the
ground.
1.
True
2.
False
9-19.
Which of the following electrical power plants
is designed primarily for use aboard aircraft
carriers?
1.
MMG-1A
2.
NC-8A
3.
NC-2A
4.
NC-10C
9-20.
Which of the following mobile or trailer
mounted
electrical
power
plants
deliver
115/200-volt,
3-phase,
400-hertz
ac
and
28 volts of dc power?
1.
NC-2A
2.
NC-8A
3.
NC-10C
4.
Each of the above
9-21.
Which of the following types of motors or
engines propel the NC-8A?
1.
Electric motor
2.
Gasoline engine
3.
Diesel engine
4.
Hydraulic motor
9-22.
Where are the ac and dc electrical cables stored
on the NC-10C?
1.
On two flaking hooks at the rear of the unit
2.
Spring-loaded reels next to the control
panel
3.
In a wire mesh cage on top of the
removable cowling
4.
Inside a hinged door compartment at the
front of the unit
9-23.
Which of the following mobile electric power
plants is/are equipped with a tow bar for towing
and steering?
1.
NC-2A
2.
NC-10C only
3.
MMG-1A only
4.
NC-10C and MMG-1A
9-24.
What does the A/M47A-4 jet aircraft start unit
provide for starting jet aircraft engines?
1.
Fuel and compressed air
2.
Hydraulic pressure and electrical power
3.
Compressed air and electrical power
4.
Fuel and hydraulic pressure
9-25.
Which of the following hazards is associated
with the operation of a gas turbine compressor
(GTC)?
1.
High volume air pressure and extreme
exhaust temperatures
2.
Jet intake suction and high noise levels
3.
Unqualified operators
4.
Each of the above
9-26.
What aircraft system is serviced using the
A/M27T-5?
1.
Pneumatic
2.
Nitrogen
3.
Hydraulic
4.
Oxygen
9-22
