8-11.
When moisture is present in the
oxygen system, the color of the
indicating agent will change to
what color?
1.
White
2.
Black
3.
Green
4.
Pink
8-12.
The indicating agent is well
mixed with the drying agent.
1.
True
2.
False
8-13.
How should the caps on the dryer
be tightened?
1.
By hand only
2.
To specified torque
3.
With a strap wrench
4.
With a pipe wrench
8-14.
If leakage occurs around the
dryer caps, what is the most
probable cause of the leak?
1.
A cross-threaded cap
2.
A crack in the dryer
3.
A bad O-ring
4.
A weak marmon clamp
8-15.
What information do the daily,
preoperational, or periodic
maintenance requirement cards for
the No-2 oxygen trailer provide?
1. Instructions for repair
2. Instructions for adjustments
3. A means of rectifying
defective
conditions
4. The minimum requirements
necessary to maintain the
equipment and ensure that no
item is overlooked
8-16. The daily requirements should be
accomplished prior to the first
use of the equipment for that
day.
1.
True
2.
False
8-17.
8-18.
8-19.
8-20.
8-21.
A temperature correction chart to
determine the pressure to which
aircraft cylinders should be
filled may be found in what
location(s)?
1.
In the oxygen trailer daily
requirement cards
2.
In the oxygen trailer
maintenance requirement cards
3.
On the aircraft oxygen
cylinders
4.
In the applicable MIM or on
the side of the No-2 oxygen
servicing trailer
Oxygen under high pressure will
increase in temperature during
the servicing procedure.
1.
True
2.
False
Learning Objective:
Identify the components,
operation, maintenance
requirements, emergency
survival equipment, and
cartridge-actuated devices
(CAD) for the ESCAPAC 1E-1
ejection seat.
The ESCAPAC 1E-1 seat provides
escape capabilities within what
ejection parameters?
1.
Ground level and O-knots
2.
All altitudes and airspeeds
3.
Both 1 and 2 above
4.
A minimum altitude of 50 feet
and 100 knots
The rocket catapult is fired by
what initiator?
1.
M99
2.
0.5-second delay
3.
Mk 86
4.
0.3-second delay
Which of the following components
prevent the forward seat from
firing before the rear seat?
1.
An in-line restrictor
2.
Mk 11 Mod 0 initiator
3.
Selector valve
4.
Diverter manifold
53
