CHAPTER 1 PERSONNEL PARACHUTE FAMILIARIZATION
PERSONNEL PARACHUTE FAMILIARIZATION
Figure 1-1.Ejection sequence
Figure 1-2.Aircraft egress, pilot chute deployed, and main canopy free of container
COMPONENTS OF PARACHUTES
CANOPIES
Figure 1-5.Suspension lines on 28-foot canopy
Figure 1-6.-Close-up view of a gore
Figure 1-8.Vent
SUSPENSION LINES - 14218_20
HARNESS HARDWARE
ADAPTERS
KOCH RELEASE ADAPTERS
PERSONNEL PARACHUTE INSPECTIONS
Figure 1-12.Shipping tags and labels
INSPECTION SCHEDULES
PARACHUTE INSPECTION AND MAINTENANCE RECORDS
Figure 1-14.Parachute configuration inspection and history record
Cartridges and Cartridge-Actuated Devices
Figure 1-15.Canopy damage chart for 28-foot diameter canopy (page 1)
Figure 1-15.Canopy damage chart for 28-foot diameter canopy (page 2)
NAVAL AVIATION MAINTENANCE PROGRAM FORMS
Original Issue/Acceptance
PROCEDURES FOR PRELIMINARY TESTS AND INSPECTIONS
INSPECTING FOR WEAR AND PHYSICAL DEFECTS
SUSPENSION AND VENT LINE INSPECTION
CONNECTOR LINK INSPECTION
BALLISTIC SPREADING GUN INSPECTION
Ripcord Handle Pocket Inspection
COMPLIANCE WITH CURRENT DIRECTIVES
CHAPTER 2 AUTOMATIC OPENING DEVICES
PREPARATION FOR USE
DISARMING
INSPECTION
FIRING ALTITUDE CHECK
RIPCORD RELEASE TEST PROCEDURE
ARMING AND ASSEMBLING THE AUTOMATIC PARACHUTE RIPCORD RELEASE
CHECKOUT OF ARMED RIPCORD RELEASE
BALLISTIC SPREADING GUN ASSEMBLY
DESCRIPTION - 14218_50
IDENTIFICATION AND HANDLING
REMOVAL OF BALLISTIC SPREADING GUN
Figure 2-23.-Loosening cartridge
Figure 2-25.Spreading gun installation
Figure 2-26.-Cartridge markings-head and side
CHAPTER 3 NES-12 PERSONNEL PARACHUTE SYSTEM
Figure 3-1.Ejection system sequence of events
Figure 3-2.Personnel Parachute Assembly, NES-12.
PRELIMINARY PROCEDURES
Figure 3-6.Rigging retaining cord (completed splice)
THE EXTERNAL PILOT PARACHUTE
SUSPENSION LINE CONTINUITYCHECK WITH SPREADING GUN INSTALLED
STRAIGHTENING CANOPY GORES WITH SPREADER GUN INSTALLED
Figure 3-17.Inspecting firing lanyard
INSTALLATION OF AUTOMATIC PARACHUTE RIPCORD RELEASE ASSEMBLY
Figure 3-24.-Installing retaining bands
ATTACHMENT OF CONTAINER ASSEMBLY TO RISER ASSEMBLY
INSTALLATION OF RELEASE ASSEMBLY LANYARD AND RIPCORD ASSEMBLY
ATTACHMENT OF FIRING LANYARD TO SUSPENSION LINE CONNECTOR LINK
Figure 3-33.Reeving release lanyard
CHAPTER 4 AIRCREW PERSONAL PROTECTIVE EQUIPMENT
Aircrew Personal Protective Equipment History Card
MODIFICATIONS OF FLIGHT EQUIPMENT
Configuration
FLYERS BOOT
ANTIEXPOSURE ASSEMBLIES
Table 4-1.Antiexposure Suit Requirements
A/P22P-6(V)2 and A/P22P-6A(V)2 Antiexposure Assemblies
Figure 4-6.CWU-23/P liner
CWU-62/P ANTIEXPOSURE COVERALL
SRU-2WP RUBBER SOCKS
ANTI-G GARMENTS
CSU-15/P ANTI-G GARMENT
Installing The CSU-15/P Anti-g Garment Hose
INTEGRATED TORSO HARNESSES
SIZING
LAP BELT AND SHOULDER ADJUSTMENTS
INSPECTIONS
MAJOR HELMET ASSEMBLIES
MAJOR HELMET COMPONENTS
HELMET CONFIGURATION BUILDUP
Table 4-3.PRK-37/P Helmet Shell Sizing Guide
INSPECTIONS
OXYGEN MASKS
Figure 4-17.MBU-14(V)1/P oxygen mask assembly
Combination Inhalation/Exhalation Valve
Figure 4-20.Cross-sectional view of valve during exhalation
ATTACHMENT OF BAYONET AND RECEIVER MECHANISM
Figure 4-23.Adjusting receiver assembly
Table 4-4.-Troubleshooting
PREFLIGHT/POSTFLIGHT INSPECTION
Figure 4-27.Removing locking nut
CHAPTER 5 RESCUE AND SURVIVAL EQUIPMENT
MK 79, MOD 0 ILLUMINATION SIGNAL KIT
DISTRESS LIGHT (SDU-5/E)
GENERAL PACKET
SURVIVAL RADIOS AND BEACONS - 14218_109
Function and Use of Operating Controls
Battery Replacement
Operating Procedure
Table 5-2.Operating Controls and IndicatorsContinued
AN/URT-33A BEACON SET RADIO
AN/PRT-5 TRANSMITTING SET
HELICOPTER RESCUE DEVICES
SURVIVORS SLING
RESCUE SEAT
FOREST PENETRATOR AND FLOTATION COLLAR
Cleaning - 14218_120
RESCUE NET
RESCUE HARNESS
Figure 5-19.Rescue harness
RESCUE HOOK
HOIST QUICK-SPLICE PLATE
PNEUMATIC RESCUE HAND TOOL
Calendar Inspection - 14218_127
Cleaning - 14218_128
CHAPTER 6 INFLATABLE SURVIVAL EQUIPMENT
DETERMINATION OF REPAIRABILITY
PULL CABLE PROOF LOAD TEST FOR MULTIPLACE RAFTS
HYDROSTATIC TEST OF CO2 CYLINDERS
MULTIPLACE RAFTS
INFLATABLE SEATS
COMBINATION SUPPLY POCKET AND BAILER
INFLATION SYSTEM
Life Raft Assembly
LRU-13/A LIFE RAFT ASSEMBLY
Table 6-5.Life Raft Survival Item Requirements and Item Storage Containers for LRU-12/A, LRU-13/A, LRU-14 Series. and LRU-15/A Life Rafts
Figure 6-3.LRU-l3/A raft-folding procedures (droppable)
LRU-14 SERIES LIFE RAFT ASSEMBLY
EQUIPMENT AND SURVIVAL ITEMS - 14218_142
LRU-15/A LIFE RAFT ASSEMBLY - 14218_143
EQUIPMENT AND SURVIVAL ITEMS - 14218_144
Figure 6-7.LRU-15/A life raft assembly, parts nomenclature
BOARDING THE RAFT
ONE-MAN LIFE RAFTS
LR-1 LIFE RAFT ASSEMBLY - 14218_148
Sea Anchor Pocket
LPU-21/P SERIES LIFE PRESERVER ASSEMBLY
Figure 6-12.LPU-21/P series life preserver assembly, parts nomenclature
LPU-23/P SERIES LIFE PRESERVER ASSEMBLY
Figure 6-13.LPU-23/P series life preserver assembly, parts nomenclature
LPU-24/P SERIES LIFE PRESERVER ASSEMBLY
Figure 6-14.LPP-l/A life preserver assembly.
LIFE PRESERVER INSPECTIONS
Figure 6-15.LPU-3O/P life preserver assembly, parts nomenclature
FUNCTIONAL TESTING
Table 6-7.Life Preserver Test Pressures
VISUAL INSPECTION
INFLATION ASSEMBLY INSPECTION
Installation of Cylinders, LPU-23/P (Series) and LPU-24/P (Series)
Battery Replacement, LPU-23/P (Series) and LPU-24/P (Series)
CHAPTER 7 SEAT SURVIVAL KIT
Figure 7-2.RSSK-8 open
Figure 7-3.Emergency oxygen schematic
ACCEPTANCE/PHASED/SDLM INSPECTIONS
Figure 7-5.Removing spring and spacer pins
Table 7-2.Troubleshooting
Functional Check
Figure 7-9.Filling adapter
Table 7-4.Charging Stages
CHAPTER 8 CARBON DIOXIDE
CO2 SUPPLY CYLINDERS
Table 8-1.Specifications On Supply Cylinders
Figure 8-3.CO2 recharging schematic
MAINTENANCE FOR THE C-O-TWO TRANSFER UNIT
CHAPTER 9 SEWING MACHINES
Figure 9-1.The lockstitch
OSCILLATING TYPE SEWING MACHINES
Timing the 31-15
Figure 9-5.0iling points at the base of the machine
Timing the Needle with the Shuttle - 14218_186
Table 9-1.Troubleshooting Chart
Adjusting the Thread Take-up Spring
Figure 9-10.Sewing machine needle
Threading the Machine - 14218_190
Threading the Bobbin Case
Replacing the Bobbin Case
Regulating the Length of a Stitch
Needles and Thread
Setting the Needle
Removing the Bobbin
Regulating the Length of Stitch - 14218_197
ROTARY SEWING MACHINES
111 W 151 Sewing Machine
Figure 9-25A.Class 111 sewing machine, side view
Timing the 111 W Class Sewing Machines
Lubrication of The Class 111 Sewing Machines
Figure 9-27.Base of machine, showing oiling points
Threading the Machine - 14218_204
Replacing the Bobbin and Threading the Bobbin Case
SINGER SEWING MACHINE 211 W 151
SETTING THE NEEDLE BAR
SETTING SEWING HOOK TO OR FROM NEEDLE
ADJUSTING FEED ECCENTRIC
Removing the Arm Shaft Connection Belt
Regulating the Length of Stitch - 14218_211
Setting and Timing the Needle Bar Frame
Raising or Lowering the Feed Dog
CONSEW 99R and 99R-3 SEWING MACHINE
Regulating the Tension
Straight and Zigzag Sewing
Setting the Needle Bar at the Correct Height
To Remove and Replace the Sewing Hook
Timing the Movement of the Needle Bar Frame
CHAPTER 10 FABRICATION AND MANUFACTURE
Selvage and Raw Edges
NOMEX Fabric
DIFFERENCE BETWEEN THREADS AND CORDS
STORAGE OF TEXTILE MATERIALS
ENGINEERING REQUIREMENTS FOR FABRICS
Elasticity (or Elastic Recovery)
Resistance to Mildew and Insects
SPECIAL HAND TOOLS
FOOT-OPERATED GROMMET PRESS
MEASURING DEVICES
SAILMAKERS PALM
Grommet Press Installation
THREE-WAY LOCKING FASTENERS
INTERLOCKING SLIDE FASTENERS
Interlocking Slide Fastener Construction
Interlocking Slide Fastener Tools
Shortening an Interlocking Slide Fastener
Procurement of Slide Fasteners
SEAMS AND KNOTS
HAND-SEWN SEAMS
Purposes and Characteristics of the Basting Stitch
Sewing the Baseball Stitch
Use of the Hand-sewn Hidden Stitch and the Needle Used
Advantages and Characteristics of a Machine-Sewn Seam
Uses of Varying Classes of Machine-sewn Seams and Stitchings
Appropriate Spacing of Machine-sewn Seams
Overhand knot
Binders Knot
Clove Hitch
CHAPTER 11 OXYGEN COMPONENTS TEST STANDS
EFFECTS OF HYPOXIA - 14218_252
TYPES OF OXYGEN
ON/OFF VALVES
Figure 11-1.Controls and indicators for Oxygen System Components Test Stand Model 117AS100
CONTROL VALVES
Nonmeasunng Control Valves
TEST STAND CONNECTIONS
CHECK VALVE CONNECTIONS
SAFETY PRECAUTIONS - 14218_260
Outward Leakage Test (Supply System)
PERIODIC INSPECTIONS - 14218_262
VOL-O-FLO ELEMENT CLEANING
Figure 11-4.Liquid Oxygen Converter Test Stand 59A120 control panel and counter top
Differential Pressure Gauge, DF-1
Linear Flow Elements
Figure 11-6.Calibration correction cards
Installation - 14218_268
LEAKAGE TEST, TEST STAND
Table 11-2.-Troubleshooting Chart
PERIODIC INSPECTIONS - 14218_271
CHAPTER 12 OXYGEN-RELATED COMPONENTS
SPECIAL INSPECTIONS
BENCH TEST
OVERLOAD TEST
Table 12-2.Troubleshooting (Pressure Breathing Test)
AIRCRAFT PANEL-MOUNTED REGULATORS
TURNAROUND/PREFLIGHT/ POSTFLIGHT/TRANSFER INSPECTIONS
ACCEPTANCE/SPECIAL/DAILY INSPECTIONS
CALENDAR/PHASED/SDLM INSPECTIONS
Table 12-5A.Troubleshooting (Inward Leakage Test)
OXYGEN SUPPLY VALVE LEAKAGE TEST
OVERALL LEAKAGE TEST
Table 12-7.-Troubleshooting (Oxygen Supply Valve Leakage Test)
SECOND STAGE RELIEF VALVE TEST
FLOW SUCTION TEST
OXYGEN RATIO TEST
BLINKER ASSEMBLY TEST
CONFIGURATION AND FUNCTION
Figure 12-5.Liquid oxygen GCU-24/A, P/N converter assembly, type 1OC-OO16-1O
Figure 12-6.-Buildup and supply mode (Converter Installed)
Figure 12-7.Converter installed in an aircraft
Figure 12-8.Converter performance test sheet (Sheet 1 of 2)
PERFORMANCE TEST SHEET PREPARATION
RELIEF VALVE
VISUAL INSPECTION
CALENDAR INSPECTION - 14218_298
CONVERTER ASSEMBLY PURGE
INSULATION RESISTANCE TEST (EMPTY)
CONVERTER LEAKAGE TEST
FILL AND BUILDUP TIME TEST
EVAPORATION LOSS TEST (BUILDUP AND SUPPLY MODE)
CONVERTER CHARGE
Summary - 14218_305
APPENDIX I GLOSSARY - 14218_307
APPENDIX I GLOSSARY - 14218_308
APPENDIX I GLOSSARY - 14218_309
APPENDIX I GLOSSARY - 14218_310
APPENDIX I GLOSSARY - 14218_311
APPENDIX I GLOSSARY - 14218_312
APPENDIX I GLOSSARY - 14218_313
APPENDIX I GLOSSARY - 14218_314
APPENDIX I GLOSSARY - 14218_315
APPENDIX I GLOSSARY - 14218_316
APPENDIX I GLOSSARY - 14218_317
APPENDIX I GLOSSARY - 14218_318
APPENDIX I GLOSSARY - 14218_319
APPENDIX I GLOSSARY - 14218_320
APPENDIX I GLOSSARY - 14218_321
APPENDIX I GLOSSARY - 14218_322
APPENDIX I GLOSSARY - 14218_323
APPENDIX II REFERENCES - 14218_325
APPENDIX II REFERENCES - 14218_326
APPENDIX II REFERENCES - 14218_327
INDEX - 14218_329
INDEX - 14218_330
INDEX - 14218_331
INDEX - 14218_332
INDEX - 14218_333
INDEX - 14218_334
INDEX - 14218_335
INDEX - 14218_336
INDEX - 14218_337
INDEX - 14218_338
INDEX - 14218_339
INDEX - 14218_340
INDEX - 14218_341
Assignment Questions - 14218_343
Assignment Questions - 14218_345
Assignment Questions - 14218_346
Assignment Questions - 14218_347
Assignment Questions - 14218_348
Assignment Questions - 14218_349
Assignment Questions - 14218_350
Assignment Questions - 14218_352
Assignment Questions - 14218_353
Assignment Questions - 14218_354
Assignment Questions - 14218_355
Assignment Questions - 14218_356
Assignment Questions - 14218_357
Assignment Questions - 14218_358
Assignment Questions - 14218_359
Assignment Questions - 14218_360
Assignment Questions - 14218_362
Assignment Questions - 14218_363
Assignment Questions - 14218_364
Assignment Questions - 14218_366
Assignment Questions - 14218_367
Assignment Questions - 14218_368
Assignment Questions - 14218_369
Assignment Questions - 14218_370
Assignment Questions - 14218_372
Assignment Questions - 14218_374
Assignment Questions - 14218_376
Assignment Questions - 14218_377
Assignment Questions - 14218_378
Assignment Questions - 14218_379
Assignment Questions - 14218_381
Assignment Questions - 14218_382
Assignment Questions - 14218_383
Assignment Questions - 14218_384
Assignment Questions - 14218_385
Assignment Questions - 14218_386
Assignment Questions - 14218_387
Assignment Questions - 14218_388
Assignment Questions - 14218_389
Assignment Questions - 14218_390
Assignment Questions - 14218_391
Assignment Questions - 14218_392
Assignment Questions - 14218_393
Assignment Questions - 14218_394
Assignment Questions - 14218_395
Assignment Questions - 14218_396
Assignment Questions - 14218_397
Assignment Questions - 14218_399
Assignment Questions - 14218_400
Assignment Questions - 14218_401
Assignment Questions - 14218_402
Assignment Questions - 14218_403
PERSONNEL PARACHUTE FAMILIARIZATION
Figure 1-1.Ejection sequence
Figure 1-2.Aircraft egress, pilot chute deployed, and main canopy free of container
COMPONENTS OF PARACHUTES
CANOPIES
Figure 1-5.Suspension lines on 28-foot canopy
Figure 1-6.-Close-up view of a gore
Figure 1-8.Vent
SUSPENSION LINES - 14218_20
HARNESS HARDWARE
ADAPTERS
KOCH RELEASE ADAPTERS
PERSONNEL PARACHUTE INSPECTIONS
Figure 1-12.Shipping tags and labels
INSPECTION SCHEDULES
PARACHUTE INSPECTION AND MAINTENANCE RECORDS
Figure 1-14.Parachute configuration inspection and history record
Cartridges and Cartridge-Actuated Devices
Figure 1-15.Canopy damage chart for 28-foot diameter canopy (page 1)
Figure 1-15.Canopy damage chart for 28-foot diameter canopy (page 2)
NAVAL AVIATION MAINTENANCE PROGRAM FORMS
Original Issue/Acceptance
PROCEDURES FOR PRELIMINARY TESTS AND INSPECTIONS
INSPECTING FOR WEAR AND PHYSICAL DEFECTS
SUSPENSION AND VENT LINE INSPECTION
CONNECTOR LINK INSPECTION
BALLISTIC SPREADING GUN INSPECTION
Ripcord Handle Pocket Inspection
COMPLIANCE WITH CURRENT DIRECTIVES
CHAPTER 2 AUTOMATIC OPENING DEVICES
PREPARATION FOR USE
DISARMING
INSPECTION
FIRING ALTITUDE CHECK
RIPCORD RELEASE TEST PROCEDURE
ARMING AND ASSEMBLING THE AUTOMATIC PARACHUTE RIPCORD RELEASE
CHECKOUT OF ARMED RIPCORD RELEASE
BALLISTIC SPREADING GUN ASSEMBLY
DESCRIPTION - 14218_50
IDENTIFICATION AND HANDLING
REMOVAL OF BALLISTIC SPREADING GUN
Figure 2-23.-Loosening cartridge
Figure 2-25.Spreading gun installation
Figure 2-26.-Cartridge markings-head and side
CHAPTER 3 NES-12 PERSONNEL PARACHUTE SYSTEM
Figure 3-1.Ejection system sequence of events
Figure 3-2.Personnel Parachute Assembly, NES-12.
PRELIMINARY PROCEDURES
Figure 3-6.Rigging retaining cord (completed splice)
THE EXTERNAL PILOT PARACHUTE
SUSPENSION LINE CONTINUITYCHECK WITH SPREADING GUN INSTALLED
STRAIGHTENING CANOPY GORES WITH SPREADER GUN INSTALLED
Figure 3-17.Inspecting firing lanyard
INSTALLATION OF AUTOMATIC PARACHUTE RIPCORD RELEASE ASSEMBLY
Figure 3-24.-Installing retaining bands
ATTACHMENT OF CONTAINER ASSEMBLY TO RISER ASSEMBLY
INSTALLATION OF RELEASE ASSEMBLY LANYARD AND RIPCORD ASSEMBLY
ATTACHMENT OF FIRING LANYARD TO SUSPENSION LINE CONNECTOR LINK
Figure 3-33.Reeving release lanyard
CHAPTER 4 AIRCREW PERSONAL PROTECTIVE EQUIPMENT
Aircrew Personal Protective Equipment History Card
MODIFICATIONS OF FLIGHT EQUIPMENT
Configuration
FLYERS BOOT
ANTIEXPOSURE ASSEMBLIES
Table 4-1.Antiexposure Suit Requirements
A/P22P-6(V)2 and A/P22P-6A(V)2 Antiexposure Assemblies
Figure 4-6.CWU-23/P liner
CWU-62/P ANTIEXPOSURE COVERALL
SRU-2WP RUBBER SOCKS
ANTI-G GARMENTS
CSU-15/P ANTI-G GARMENT
Installing The CSU-15/P Anti-g Garment Hose
INTEGRATED TORSO HARNESSES
SIZING
LAP BELT AND SHOULDER ADJUSTMENTS
INSPECTIONS
MAJOR HELMET ASSEMBLIES
MAJOR HELMET COMPONENTS
HELMET CONFIGURATION BUILDUP
Table 4-3.PRK-37/P Helmet Shell Sizing Guide
INSPECTIONS
OXYGEN MASKS
Figure 4-17.MBU-14(V)1/P oxygen mask assembly
Combination Inhalation/Exhalation Valve
Figure 4-20.Cross-sectional view of valve during exhalation
ATTACHMENT OF BAYONET AND RECEIVER MECHANISM
Figure 4-23.Adjusting receiver assembly
Table 4-4.-Troubleshooting
PREFLIGHT/POSTFLIGHT INSPECTION
Figure 4-27.Removing locking nut
CHAPTER 5 RESCUE AND SURVIVAL EQUIPMENT
MK 79, MOD 0 ILLUMINATION SIGNAL KIT
DISTRESS LIGHT (SDU-5/E)
GENERAL PACKET
SURVIVAL RADIOS AND BEACONS - 14218_109
Function and Use of Operating Controls
Battery Replacement
Operating Procedure
Table 5-2.Operating Controls and IndicatorsContinued
AN/URT-33A BEACON SET RADIO
AN/PRT-5 TRANSMITTING SET
HELICOPTER RESCUE DEVICES
SURVIVORS SLING
RESCUE SEAT
FOREST PENETRATOR AND FLOTATION COLLAR
Cleaning - 14218_120
RESCUE NET
RESCUE HARNESS
Figure 5-19.Rescue harness
RESCUE HOOK
HOIST QUICK-SPLICE PLATE
PNEUMATIC RESCUE HAND TOOL
Calendar Inspection - 14218_127
Cleaning - 14218_128
CHAPTER 6 INFLATABLE SURVIVAL EQUIPMENT
DETERMINATION OF REPAIRABILITY
PULL CABLE PROOF LOAD TEST FOR MULTIPLACE RAFTS
HYDROSTATIC TEST OF CO2 CYLINDERS
MULTIPLACE RAFTS
INFLATABLE SEATS
COMBINATION SUPPLY POCKET AND BAILER
INFLATION SYSTEM
Life Raft Assembly
LRU-13/A LIFE RAFT ASSEMBLY
Table 6-5.Life Raft Survival Item Requirements and Item Storage Containers for LRU-12/A, LRU-13/A, LRU-14 Series. and LRU-15/A Life Rafts
Figure 6-3.LRU-l3/A raft-folding procedures (droppable)
LRU-14 SERIES LIFE RAFT ASSEMBLY
EQUIPMENT AND SURVIVAL ITEMS - 14218_142
LRU-15/A LIFE RAFT ASSEMBLY - 14218_143
EQUIPMENT AND SURVIVAL ITEMS - 14218_144
Figure 6-7.LRU-15/A life raft assembly, parts nomenclature
BOARDING THE RAFT
ONE-MAN LIFE RAFTS
LR-1 LIFE RAFT ASSEMBLY - 14218_148
Sea Anchor Pocket
LPU-21/P SERIES LIFE PRESERVER ASSEMBLY
Figure 6-12.LPU-21/P series life preserver assembly, parts nomenclature
LPU-23/P SERIES LIFE PRESERVER ASSEMBLY
Figure 6-13.LPU-23/P series life preserver assembly, parts nomenclature
LPU-24/P SERIES LIFE PRESERVER ASSEMBLY
Figure 6-14.LPP-l/A life preserver assembly.
LIFE PRESERVER INSPECTIONS
Figure 6-15.LPU-3O/P life preserver assembly, parts nomenclature
FUNCTIONAL TESTING
Table 6-7.Life Preserver Test Pressures
VISUAL INSPECTION
INFLATION ASSEMBLY INSPECTION
Installation of Cylinders, LPU-23/P (Series) and LPU-24/P (Series)
Battery Replacement, LPU-23/P (Series) and LPU-24/P (Series)
CHAPTER 7 SEAT SURVIVAL KIT
Figure 7-2.RSSK-8 open
Figure 7-3.Emergency oxygen schematic
ACCEPTANCE/PHASED/SDLM INSPECTIONS
Figure 7-5.Removing spring and spacer pins
Table 7-2.Troubleshooting
Functional Check
Figure 7-9.Filling adapter
Table 7-4.Charging Stages
CHAPTER 8 CARBON DIOXIDE
CO2 SUPPLY CYLINDERS
Table 8-1.Specifications On Supply Cylinders
Figure 8-3.CO2 recharging schematic
MAINTENANCE FOR THE C-O-TWO TRANSFER UNIT
CHAPTER 9 SEWING MACHINES
Figure 9-1.The lockstitch
OSCILLATING TYPE SEWING MACHINES
Timing the 31-15
Figure 9-5.0iling points at the base of the machine
Timing the Needle with the Shuttle - 14218_186
Table 9-1.Troubleshooting Chart
Adjusting the Thread Take-up Spring
Figure 9-10.Sewing machine needle
Threading the Machine - 14218_190
Threading the Bobbin Case
Replacing the Bobbin Case
Regulating the Length of a Stitch
Needles and Thread
Setting the Needle
Removing the Bobbin
Regulating the Length of Stitch - 14218_197
ROTARY SEWING MACHINES
111 W 151 Sewing Machine
Figure 9-25A.Class 111 sewing machine, side view
Timing the 111 W Class Sewing Machines
Lubrication of The Class 111 Sewing Machines
Figure 9-27.Base of machine, showing oiling points
Threading the Machine - 14218_204
Replacing the Bobbin and Threading the Bobbin Case
SINGER SEWING MACHINE 211 W 151
SETTING THE NEEDLE BAR
SETTING SEWING HOOK TO OR FROM NEEDLE
ADJUSTING FEED ECCENTRIC
Removing the Arm Shaft Connection Belt
Regulating the Length of Stitch - 14218_211
Setting and Timing the Needle Bar Frame
Raising or Lowering the Feed Dog
CONSEW 99R and 99R-3 SEWING MACHINE
Regulating the Tension
Straight and Zigzag Sewing
Setting the Needle Bar at the Correct Height
To Remove and Replace the Sewing Hook
Timing the Movement of the Needle Bar Frame
CHAPTER 10 FABRICATION AND MANUFACTURE
Selvage and Raw Edges
NOMEX Fabric
DIFFERENCE BETWEEN THREADS AND CORDS
STORAGE OF TEXTILE MATERIALS
ENGINEERING REQUIREMENTS FOR FABRICS
Elasticity (or Elastic Recovery)
Resistance to Mildew and Insects
SPECIAL HAND TOOLS
FOOT-OPERATED GROMMET PRESS
MEASURING DEVICES
SAILMAKERS PALM
Grommet Press Installation
THREE-WAY LOCKING FASTENERS
INTERLOCKING SLIDE FASTENERS
Interlocking Slide Fastener Construction
Interlocking Slide Fastener Tools
Shortening an Interlocking Slide Fastener
Procurement of Slide Fasteners
SEAMS AND KNOTS
HAND-SEWN SEAMS
Purposes and Characteristics of the Basting Stitch
Sewing the Baseball Stitch
Use of the Hand-sewn Hidden Stitch and the Needle Used
Advantages and Characteristics of a Machine-Sewn Seam
Uses of Varying Classes of Machine-sewn Seams and Stitchings
Appropriate Spacing of Machine-sewn Seams
Overhand knot
Binders Knot
Clove Hitch
CHAPTER 11 OXYGEN COMPONENTS TEST STANDS
EFFECTS OF HYPOXIA - 14218_252
TYPES OF OXYGEN
ON/OFF VALVES
Figure 11-1.Controls and indicators for Oxygen System Components Test Stand Model 117AS100
CONTROL VALVES
Nonmeasunng Control Valves
TEST STAND CONNECTIONS
CHECK VALVE CONNECTIONS
SAFETY PRECAUTIONS - 14218_260
Outward Leakage Test (Supply System)
PERIODIC INSPECTIONS - 14218_262
VOL-O-FLO ELEMENT CLEANING
Figure 11-4.Liquid Oxygen Converter Test Stand 59A120 control panel and counter top
Differential Pressure Gauge, DF-1
Linear Flow Elements
Figure 11-6.Calibration correction cards
Installation - 14218_268
LEAKAGE TEST, TEST STAND
Table 11-2.-Troubleshooting Chart
PERIODIC INSPECTIONS - 14218_271
CHAPTER 12 OXYGEN-RELATED COMPONENTS
SPECIAL INSPECTIONS
BENCH TEST
OVERLOAD TEST
Table 12-2.Troubleshooting (Pressure Breathing Test)
AIRCRAFT PANEL-MOUNTED REGULATORS
TURNAROUND/PREFLIGHT/ POSTFLIGHT/TRANSFER INSPECTIONS
ACCEPTANCE/SPECIAL/DAILY INSPECTIONS
CALENDAR/PHASED/SDLM INSPECTIONS
Table 12-5A.Troubleshooting (Inward Leakage Test)
OXYGEN SUPPLY VALVE LEAKAGE TEST
OVERALL LEAKAGE TEST
Table 12-7.-Troubleshooting (Oxygen Supply Valve Leakage Test)
SECOND STAGE RELIEF VALVE TEST
FLOW SUCTION TEST
OXYGEN RATIO TEST
BLINKER ASSEMBLY TEST
CONFIGURATION AND FUNCTION
Figure 12-5.Liquid oxygen GCU-24/A, P/N converter assembly, type 1OC-OO16-1O
Figure 12-6.-Buildup and supply mode (Converter Installed)
Figure 12-7.Converter installed in an aircraft
Figure 12-8.Converter performance test sheet (Sheet 1 of 2)
PERFORMANCE TEST SHEET PREPARATION
RELIEF VALVE
VISUAL INSPECTION
CALENDAR INSPECTION - 14218_298
CONVERTER ASSEMBLY PURGE
INSULATION RESISTANCE TEST (EMPTY)
CONVERTER LEAKAGE TEST
FILL AND BUILDUP TIME TEST
EVAPORATION LOSS TEST (BUILDUP AND SUPPLY MODE)
CONVERTER CHARGE
Summary - 14218_305
APPENDIX I GLOSSARY - 14218_307
APPENDIX I GLOSSARY - 14218_308
APPENDIX I GLOSSARY - 14218_309
APPENDIX I GLOSSARY - 14218_310
APPENDIX I GLOSSARY - 14218_311
APPENDIX I GLOSSARY - 14218_312
APPENDIX I GLOSSARY - 14218_313
APPENDIX I GLOSSARY - 14218_314
APPENDIX I GLOSSARY - 14218_315
APPENDIX I GLOSSARY - 14218_316
APPENDIX I GLOSSARY - 14218_317
APPENDIX I GLOSSARY - 14218_318
APPENDIX I GLOSSARY - 14218_319
APPENDIX I GLOSSARY - 14218_320
APPENDIX I GLOSSARY - 14218_321
APPENDIX I GLOSSARY - 14218_322
APPENDIX I GLOSSARY - 14218_323
APPENDIX II REFERENCES - 14218_325
APPENDIX II REFERENCES - 14218_326
APPENDIX II REFERENCES - 14218_327
INDEX - 14218_329
INDEX - 14218_330
INDEX - 14218_331
INDEX - 14218_332
INDEX - 14218_333
INDEX - 14218_334
INDEX - 14218_335
INDEX - 14218_336
INDEX - 14218_337
INDEX - 14218_338
INDEX - 14218_339
INDEX - 14218_340
INDEX - 14218_341
Assignment Questions - 14218_343
Assignment Questions - 14218_345
Assignment Questions - 14218_346
Assignment Questions - 14218_347
Assignment Questions - 14218_348
Assignment Questions - 14218_349
Assignment Questions - 14218_350
Assignment Questions - 14218_352
Assignment Questions - 14218_353
Assignment Questions - 14218_354
Assignment Questions - 14218_355
Assignment Questions - 14218_356
Assignment Questions - 14218_357
Assignment Questions - 14218_358
Assignment Questions - 14218_359
Assignment Questions - 14218_360
Assignment Questions - 14218_362
Assignment Questions - 14218_363
Assignment Questions - 14218_364
Assignment Questions - 14218_366
Assignment Questions - 14218_367
Assignment Questions - 14218_368
Assignment Questions - 14218_369
Assignment Questions - 14218_370
Assignment Questions - 14218_372
Assignment Questions - 14218_374
Assignment Questions - 14218_376
Assignment Questions - 14218_377
Assignment Questions - 14218_378
Assignment Questions - 14218_379
Assignment Questions - 14218_381
Assignment Questions - 14218_382
Assignment Questions - 14218_383
Assignment Questions - 14218_384
Assignment Questions - 14218_385
Assignment Questions - 14218_386
Assignment Questions - 14218_387
Assignment Questions - 14218_388
Assignment Questions - 14218_389
Assignment Questions - 14218_390
Assignment Questions - 14218_391
Assignment Questions - 14218_392
Assignment Questions - 14218_393
Assignment Questions - 14218_394
Assignment Questions - 14218_395
Assignment Questions - 14218_396
Assignment Questions - 14218_397
Assignment Questions - 14218_399
Assignment Questions - 14218_400
Assignment Questions - 14218_401
Assignment Questions - 14218_402
Assignment Questions - 14218_403
