1-49.
Premature or accidental withdrawal of an arm-
ing wire from a component is prevented by the
installation of which of the following devices?
1.
C clamps
2.
Metal crimps
3.
Safety clips
4.
Plastic retainers
1-50.
A conical fin assembly is used with what
delivery mode?
1.
High altitude
2.
Unretarded only
3.
Retarded only
4.
Unretarded or retarded
1-51.
What is the basic difference between the types
of conical fins?
1.
Color
2.
Weight
3.
Markings
4.
Physical size
1-52.
A conical fin assembly is attached to the aft end
of a bomb by what means?
1.
Cam locks
2.
Setscrews
3.
A quick-release clamp
4.
A quick-release adapter
1-53.
To prevent damage to an aircraft from
ricocheting bombs or fragments during high-
speed, low-altitude delivery, which of the
following fin assembly configurations should
be used with LDGP bombs?
1.
Conical, retarded mode
2.
Snakeye, retarded mode
3.
Conical, unretarded mode
4.
Snakeye, unretarded mode
1-54.
The MAU-91 fin is attached to a Mk 83 bomb
by what means?
1.
Nine setscrews
2.
An ADU-320/B fin adapter
3.
An MAU-93A/A fin adapter
4.
A quick-release band
1-55.
MAU-91A/B and B/B Snakeye fin assemblies
are used on which of the following LDGP
bombs?
1.
Mk 81
2.
Mk 82
3.
Mk 83
4.
Mk 84
1-56.
To provide the pilot with in-flight selection
capability, the swivel loop of a Snakeye fin
release wire is connected to what component?
1.
The nose arming solenoid
2.
The arming wire retainer
3.
The arming wire guide tube
4.
The tail arming solenoid
1-57.
Which of the following LDGP bombs can be
configured as laser-guided bombs?
1.
Mk 82 only
2.
Mk 83 only
3.
Mk 84 only
4.
Mk 82, Mk 83, and Mk 84
1-58.
The computer-control group (CCG) of a laser
guidance kit is used for what purpose?
1.
To detect laser-illuminated targets only
2.
To provide an attachment point for the
guidance fins only
3.
To detect laser-illuminated targets and to
provide an attachment point for the
guidance fins
4.
To provide an attachment point for the
wing assemblies
1-59.
A GBU-24B/B will penetrate how many feet of
reinforced concrete?
1.
1 to 2 ft
2.
2 to 3 ft
3.
3 to 4 ft
4.
4 to 6 ft
1-60.
The total amount of thermal coating missing
from a GBU-24B/B must NOT exceed what
amount?
1.
40 sq. in.
2.
20 sq. in.
3.
15 sq. in.
4.
25 sq. in.
1-61.
DSTs are identified by what color stripes?
1.
Brown
2.
Yellow
3.
Blue
4.
White
1-62.
What kit should you use to configure an LDGP
bomb to a DST?
1.
Mk 73
2.
Mk 74
3.
Mk 75
4.
Mk 76
5
