9-24.
The stepper switch on the SUU-25F/A
dispenser has what maximum number of
settings?
1.
6
2.
2
3.
8
4.
10
9-25.
When the SUU-25F/A dispenser is in the
locked position, which of the following
dispenser components prevents loaded stores
from being inadvertently ejected by the forces
during aircraft catapult launches?
1.
The forward retaining locks only
2.
The aft retaining locks only
3.
The forward and aft retaining locks
4.
The forward and aft shear retainer pins
9-26.
After the forward store is loaded into the
dispenser tube of the SUU-25F/A dispenser,
you should rotate the forward retainer lock to
the locked position and secure it with what
device?
1.
A piece of safety wire
2.
A shear pin
3.
A cotter pin
4.
An arming wire
9-27.
What component of the SUU-25F/A dispenser
initiates the arming sequence of a store as the
store is ejected from the tube?
1.
The arming wire
2.
The arming mechanism
3.
The aft retaining lock
4.
The forward retaining lock
9-28.
When munitions are loaded into the tubes of
the
SUU-25F/A
dispenser,
cross-shaped
plastic spacers are installed between munitions
for what purpose?
1.
To provide a cushion
2.
To provide an expansion area
3.
To provide a gas seal
4.
To fill in excess tube space
9-29.
When the pilot triggers the dispensing switch,
28 volts of dc is passed through an electrical
cable from the aircraft to which of the
following pins of the SUU-25F/A dispenser?
1.
J1 or J2
2.
J3 or J4
3.
J5 or J6
4.
J7 or J8
9-30.
During the ejection sequence of munitions
from the SUU-25F/A dispenser, which of the
following components cams the arming hook
up to engage the arming cap?
1.
The yellow sealing ring
2.
The green sealing ring
3.
The arming wire
4.
The cross-shaped plastic spacer
9-31.
The AN/ALE-29A chaff dispenser is capable
of cartridge ejecting which of the following
load configurations?
1.
Mk 46 only
2.
MJU-8/B only
3.
RR-144 only
4.
Mk 46, MJU-8/B, and RR-144
9-32.
Which of the following equipment is designed
to be externally mounted on aircraft IMER/
ITER bomb ejector racks?
1.
AN/ALE-29A
2.
AN/ALE-37A
3.
AN/ALE-39A
4.
AN/ASM-127
9-33.
The AN/ALE-37 chaff dispensing set has a
capacity of what total number of rounds?
1.
240 rounds
2.
180 rounds
3.
120 rounds
4.
110 rounds
9-34.
When
fully
loaded,
the
AN/ALE-37A
countermeasures chaff dispensing set weighs a
total of how many pounds?
1.
120 lb
2.
240 lb
3.
277 lb
4.
375 lb
9-35.
The insertion of a lanyard pin is provided by
which of the following components of the AN/
ALE-37A countermeasures chaff dispensing
set?
1.
The nose cone
2.
The tail cone
3.
The module
4.
The housing
47
