10-62. To determine if maintenance procedures require the assistance of personnel in other ratings, you should refer to what reference? 1. SAF 2. PMS card 3. VIDS/MAF 4. IWHS card 10-63.   The tag-out and tag-in system is used for what purpose? 1. To identify defective components only 2. To identify usable components only 3. To identify defective and usable components 4. To    ensure    the    safety    of    maintenance personnel 10-64.   When,  if  ever,  is  it  permissible  to  dispatch  an elevator   from   one   deck   to   another   without communications between the sending operator and the receiving operator? 1. During emergency operations 2. When  directed  by  the  ordnance  handling officer 3. During high-tempo operations 4. Never 10-65.   An  ordnance  mishap  is  most  likely  to  occur under which of the following conditions? 1. When seas are rough 2. When  magazine  hatches  are  not  properly secured 3. When weapons or explosives are removed from stowage 4. When weapons or explosives are stored in magazines 10-66.   When live ammunition is staged on the hanger deck,   which   of   the   following   conditions   is applicable? 1. A security watch should be posted 2. The staging area should be located a long distance from the aircraft elevator doors 3. The  live  ordnance  should  be  covered  to protect  it  from  the  hanger-bay  sprinkler system 4. All of the above 10-67.   The  bomb  farm  watch  performs  which  of  the following functions? 1. Maintains direct communications with the AOCS 2. Maintains the security of ordnance 3. Issues ordnance to squadron personnel 4. All of the above 10-68.   The bomb farm is routinely replenished by use of  the  upper-stage  and  lower-stage  weapons elevators and which of the following elevators? 1. The forward elevator only 2. The aft elevator only 3. The forward and aft elevators 4. The deck-edge elevator 10-69.   Pier-side ammunition handling operations may be conducted after daylight hours under which of the following conditions? 1. When the pier is adequately lighted only 2. When an emergency exists only 3. When the pier is adequately lighted and an emergency exists 4. When authorized by the supply officer 10-70.   When  a  ship  is  at  explosive  anchorage,  the transfer of ammunition is normally conducted during what general time period? 1. Daytime only 2. Nighttime only 3. Daytime or nighttime 4. Between 0800 and 1000 10-71.   The transfer of ammunition at sea is accomplished    by    which    of    the    following replenishment methods? 1. Conventional only 2. Vertical only 3. Conventional and vertical 4. Special 10-72.   During the conventional replenishment method at  the  hanger  deck  level,  the  point  of  contact between the supply ship and the receiving ship is known by what term? 1. The receiving station 2. The conning station 3. The supply point 4. The issuing point 54