SUU-25 FLARE DISPENSER
Perform loading and unloading of the dispenser in
authorized areas only.
Adapter Kits
Install adapter kits on flares as follows:
1.
Make sure the timer knob is on safe.
2.
Make sure there is no external damage.
3.
Check the adapter kit (fig. 13-26) for two green
arming caps with serviceable arming lanyards,
one white two-piece spacer, and four yellow
sealing rings.
4.
Rotate the time knob to required setting.
5.
Install yellow sealing ring on each end of flare.
6.
Connect green arming cap lanyard (fig. 13-27)
to timer knob.
7.
Install green cap on yellow sealing ring.
8.
Place the two halves of the white spacer
together and install on the aft end of the
forward flare (fig. 13-28).
13-25
Figure 13-27.—Lanyard configuration.
Figure 13-28.—Installation of spacer assemblies on flares.
