2-22.
What is the function of the cable
2-23.
2-24.
2-25.
anchor damper?
1.
To reduce vibration in the
cable system by eliminating
cable slack between the
crosshead and fixed sheave
assembly during retraction
2.
To reduce vibration in the
purchase cable system by
eliminating cable slack between
the crosshead and fixed sheave
assembly during an arrestment
3.
To provide a means of anchoring
the purchase cable in the
engine room
4.
To indicate that the arresting
engine has returned to the
battery position after
arrestment
What source provides the energy for
the battery positioner to operate?
1.
Hydraulics
2.
Electricity
3.
Pneumatics
4.
Electrohydraulics
Which of the following is NOT a
part of the sheave damper assembly?
1.
The anchor assembly
2.
The buffer assembly
3.
The charging panel
4.
The damper piston
What is the purpose of the sheave
damper flow control valve?
1.
To allow free flow of fluid
from the damper cylinder to the
damper accumulator and a
restricted flow from the damper
accumulator to the damper
cylinder
2.
To allow restricted flow of
fluid from the damper cylinder
to the damper accumulator and
free flow from the damper
accumulator to the damper
cylinder
3.
To allow free flow of fluid to
and from the damper accumulator
only
4.
To allow free flow of fluid
from the damper cylinder to the
accumulator only
2-26.
What is the primary function of the
purchase cables?
1.
To transmit the landing
aircrafts force to the
arresting engine
2.
To tension the crossdeck
pendant
3.
To drive the control systems of
the arresting engine
4.
To retract the crossdeck
pendant
2-27.
If the purchase cable payout is 72
2-28.
2-29.
2-30.
2-31.
feet, the engine ram will travel a
total of how many feet?
1.
5
2.
2
3.
3
4.
4
What two methods can be used to
operate the retractable deck
sheaves?
1.
Hydraulically and manually
2.
Pneumatically and manually
3.
Electrically and manually
4.
Hydraulically and pneumatically
The adjustable torque limit switch
is actuated by which of the
following components?
1.
The worm
2.
The tripping plate washer
3.
The torque spring
4.
The wormshaft
What is the only function of the
retractable deck sheave limit
bevel gear?
1.
To transmit the motor force to
the wormshaft
2.
To engage the lugs of the
clutch bevel gear
3.
To rotate the sleeve
4.
To turn the pinion of the
geared limit switch
Who may make adjustments to the
retractable deck sheave geared limit
switch?
1.
Anyone from E division
2.
The work-center supervisor only
3.
A qualified electrician only
4.
Anyone from the QA branch
2-32.
The crossdeck pendant cable ends
are equipped with what type of
terminals?
1.
Swaged
2.
Poured basket
3.
Fiege
4.
Clamp
8