4-8.
After seat ejection, the seat is
4-9.
4-10.
4-11.
4-12.
stabilized and the forward speed is
retarded by what component(s)?
1.
Personal parachute
2.
Drogue parachute
3.
Bridle system
4.
Both 2 and 3 above
What component automatically controls
drogue deployment, seat/man separa-
tion, and parachute deployment after
ejection?
1.
Barostatic release unit
2.
Time release mechanism
3.
Drogue/bridle release system
4.
Multimode electronic sequencer
The NACES consists of what total
number of main assemblies?
1.
Six
2.
Five
3.
Three
4.
Four
What is the primary purpose of the
catapult assembly?
1.
To jettison the seat from the
aircraft
2.
To provide initial power for seat
ejection
3.
To secure the seat to the
aircraft structure
4.
Both 2 and 3 above
The seat bucket assembly consists of
the underseat rocket motor, lateral
thrust motor, leg restraint snubbers,
two pitot assemblies, shoulder
harness control lever, and pin
puller.
1.
True
2.
False
4-13.
When the ejection seat is installed
in the aircraft, what component
locks it to the catapult?
1.
Upper right main beam
2.
Upper left main beam
3.
Top latch plunger
4.
Barostatic release unit
4-14.
What barrels make up the catapult
ejection gun?
1.
Inner, outer only
2.
Inner, intermediate only
3.
Intermediate, outer only
4.
Inner, intermediate, outer
4-15.
What crossbeam takes the full thrust
of the catapult during ejection?
1.
Top crossbeam
2.
Center crossbeam
3.
Bottom crossbeam
4-16.
What services do the seat bucket
slippers provide?
1.
Attachment points for the
seatbucket to the mainbeam
2.
Damping out lateral movement
3.
Smooth movement of the seat
bucket
4-17.
What total number of slippers are
attached to the guide rails of the
mainbeam assembly?
1.
Five
2.
Six
3.
Three
4.
Four
4-18.
What handle is located on the left
side of the seat bucket?
1.
Safe/arm control
2.
Seat height adjustment
3.
Shoulder harness control
4.
Manual override
25
