9-50.
Gas pressure from the seat/man
separation initiator is
transmitted to what device(s)?
1.
Inertia reel strap guillotine
2.
Drogue release assembly
2.
Parachute container opener
4.
All of the above
1. 5 pounds
2. 10 pounds
3. 15 pounds
4. 20 pounds
9-51.
When the emergency release handle
is pulled, which of the following
actions takes place?
1.
The seat release shaft
rotates
2.
The harness release actuator
retracts
3.
The firing central disconnect
fitting unseats
4.
The time-release mechanism
arms
9-52.
A full emergency oxygen bottle
contains a total of how many
cubic inches of oxygen?
1. 30
2. 40
3. 50
4. 60
1. 20 pounds
2. 30 pounds
3. 40 pounds
4. 50 pounds
9-53.
The emergency oxygen supply
lanyard is attached to the bottom
of the seat pan and to what other
item?
1.
Cockpit deck
2.
Safe and arm control handle
3.
Catapult cartridge manifold
4.
Seat release shaft
9-54.
A properly serviced emergency
oxygen system should have what
prescribed pressure when the
bottle is full?
1. 1200 psi
2. 1500 psi
3. 1800 psi
4. 2100 psi
1. 5 and 15 pounds
2. 15 and 25 pounds
3. 25 andf 35 pounds
4. 35 and 45 pounds
9-55.
Automatic actuation of the
emergency oxygen supply also
provides automatic actuation of
the emergency locator beacon.
9-56.
When performing the safe and arm
control assembly check-out, what
should be the maximum amount of
force required to move the handle
to the full up position?
9-57.
What is the name of the component
that block the movement of the
initiation rotors?
1.
T-bar
2.
Interlock block
3.
Arming key
4.
Trip rod
9-58.
During the emergency release
handle check, the handle should
move up with a maximum force of
9-59.
(Refer to fig. 6-46 and
supporting material in the text.)
What devices are installed in the
separation lanyard retainer
assemblies to hold the seat
release lanyard bell cranks in
place?
1.
Trip rods
2.
Shear pins
3.
Cotter pins
4.
Setscrews
9-60.
The initial breakout force for
the ejection control assembly
check should be between what
maximum number of pounds?
9-61.
When performing the inertial reel
check, the force required to
extend the risers should be
between what maximum number of
pounds?
1. True
2. False
1. 5 and 15 pounds
2. 15 and 25 pounds
3. 25 and 35 pounds
4. 35 and 45 pounds
62
