9-62. 9-63. 9-64. 9-65. 9-66. How many steps are used to complete the seat height adjustment actuator check-out? 1. Five 2. Two 3. Three 4. Four To prevent heat damage to the height adjustment actuator motor, what are the operating time limits that must be observed? 1. 15 seconds on and 30 seconds off 2. 30 seconds on and 1 minute off 3. 30 seconds on and 45 seconds off 4. 1 minute on and 1 minute off The airspeed/altitude sensor must be removed to perform the check- out procedure. 1. True 2. False Recording to the NA 01-1A-509, ejection seats should be inspected for corrosion control at what minimum interval while at sea? 1. Every day 2. Every other day 3. Every 7 days 4. Every 14 days VV-L-800 lubricating oil should be applied to all points that slide and used as a corrosion preventive for all bright metal parts. 1. True 2. False 9-67. 9-68. 9-69. 9-70. During emergency cleaning of the ejection seat, what should you use to rinse the seat? 1. Lubricating oil 2. Fresh water 3. Safety solvent 4. Water emulsion cleaner The MIMs and MRCs for most ejection seat systems provide explicit instructions for corrosion control. 1. True 2. False Indiscriminate use of paint, preservatives, or other materials that dry and buildup following application can prevent or restrict proper motion of movable parts. 1. True 2. False What color flags are used on ejection seat ground safety pins? 1. Red 2. Orange 3. Yellow 4. Black and white 63