1-35. A bomb body is shipped with a plastic plug installed in the nose and tail fuze wells to prevent what occurrence? 1. The explosive filler from spilling out 2. Damage to the external threads only 3. Moisture from entering the fuze wells only 4. Damage to the external threads and moisture from entering the fuze wells 1-36. What total number of Mk 83 general- purpose bombs can be placed on a metal pallet? 1. One 2. Two 3. Three 4. Four 1-37. When electric fuzing is used, a path for the charging current from the fuze-charging receptacle to the forward and aft fuze wells is provided by which of the following mechanisms? 1. The fuze-charging safety switch 2. The forward and aft charging tubes 3. The electronic circuit device 4. The electric fuze wire harness 1-38. A general-purpose bomb uses which of the following types of high- explosive fillers? 1. H-6 only 2. Tritonal 80-20 only 3. H-6 and Tritonal 80-20 4. Lead azide or TNT 1-39. A thermally protected general- purpose bomb is identified by which of the following markings? 1. Two yellow bands around the nose 2. Two white bands around the nose 3. Two yellow bands around the tail 4. Two white bands around the tail 1-40. Arming wire assemblies are used for 1-41. 1-42. 1-43. 1-44. 1-45. 1-46. what purpose? 1. To initiate the arming sequence of mechanical fuzes 2. To initiate the arming sequence of electrical fuzes 3. To actuate the fins on a Snakeye fin assembly 4. To maintain ordnance components in a safe condition until the actual release of a weapon from an aircraft Premature or accidental withdrawal of an arming wire from a component is prevented by the installation of which of the following devices? 1. C clamps 2. Metal crimps 3. Safety clips 4. Plastic retainers A conical fin assembly is used with what delivery mode? 1. High altitude 2. Unretarded only 3. Retarded only 4. Unretarded or retarded A conical fin assembly is attached to the aft end of a bomb by what means ? 1. Cam locks 2. Setscrews 3. A quick-release clamp 4. A quick-release adapter To prevent damage to an aircraft from ricocheting bombs or fragments during high-speed, low-altitude delivery, which of the following fin assembly configurations should be used with LDGP bombs? 1. Conical retarded mode 2. Snakeye retarded mode 3. Conical unretarded mode 4. Snakeye, unretarded mode The MAU-91 fin is attached to a Mk 83 bomb by what means? 1. Nine setscrews 2. An ADU-320/B fin adapter 3. An MAU-93A/A fin adapter 4. A quick-release band MAU-91A/B and B/B Snakeye fin assemblies are used on which of the following LDGP bombs? 1. Mk 81 2. Mk 82 3. Mk 83 4. Mk 84 4