5-51. 5-52. 5-53. The LALS ammunition drum consists of two scoop disk assemblies, two cover assemblies, and what other component? 1. An inner drum 2. An exit unit 3. An entrance unit 4. An inner drum bypass The LALS rounds-remaining indicator is located on what component? 1. The outer drum 2. The drum cover 3. The exit unit 4. The entrance unit The LALS drive assembly is mounted on brackets that are located on what component? 1. The drum loader 2. The entrance unit 3. The exit drum cover 4. The entrance drum cover 5-54. The LALS drum loader assembly 5-55. 5-56. 5-57. consists of which of the following components ? 1. One load tray, one belt of elements, and one chute 2. One load tray, one belt of elements, and two chutes 3. One load tray, two belts of elements, and two chutes 4. Two load trays, two belts of a  n  d   t  w  o   c  h  u  t  e s What LALS assembly has a hole for spent cases to drop through? 1. The drum loader assembly 2. The drum unload assembly 3. The conveyer assembly 4. The exit unit assembly Which of the following LALS assemblies is/are part of the conveyor system? 1. The entrance unit assembly only 2. The exit unit assembly only 3. The chute support assembly only 4. The entrance unit assembly, exit unit assembly, and chute support assembly Rounds from the transporter are removed and placed into the elements by what assembly? 1. The entrance unit assembly 2. The exit cover assembly 3. The exit unit assembly 4. The entrance cover assembly 5-58. What LALS assembly transfers the rounds coming from the exit unit assembly to the aircraft system? 1. The adapter assembly 2. The entrance unit assembly 3. The exit unit assembly 4. The interface unit assembly 5-59. Spent cases or cleared rounds are removed from the elements and placed on the transporter by what assembly? 1. The entrance unit assembly 2. The exit unit assembly 3. The entrance cover assembly 4. The exit cover assembly 5-60. A LALS is designed to operate in which of the following modes? 1. Bypass only 2. Loading/downloading aircraft gun systems only 3. Loading/downloading the transponder 4. Bypass, loading/downloading aircraft gun systems, or loading/downloading the transponder 5-61. The loading or unloading of a LALS transponder should be conducted in a RADHAZ-safe area for which of the following reasons? 1. To prevent the transporter from overheating 2. To prevent the primers from firing 3. To prevent the gun from being accidentally fired 4. To prevent the casings from overheating 5-62. When loading or simultaneously loading/unloading, what device should you use to drive the LALS transporter? 1. A handcrank 2. A hydraulic drive unit 3. A load unit assembly 4. An electrical drive unit 5-63. When loading or downloading an aircraft gun system, you should make sure the conveyor system is located on what component? 1. The transporter 2. The ammunition chute 3. The interface unit assembly 4. The timed exit unit assembly 27