7-27. 7-28. 7-29. 7-30. 7-31. An IMER has what total number of ejector racks? 1. Six 2. Two 3. Three 4. Four What assembly forms the main support for an IMER or ITER? 1. Ejector 2. Adapter 3. Housing 4. Wiring support To mechanically safe an IMER or ITER ejector unit assembly, which of the following components should be used? 1. A safety pin 2. A safety-stop lever 3. A metal band 4. A cotter pin What component of an IMER or ITER ejector unit assembly actuates the store sensing switch? 1. The forward suspension hook 2. The electrical safety pin 3. The aft suspension hook 4. The safety-stop lever After suspension hooks are locked on an IMER/ITER ejector unit assembly, they are prevented from opening until the cartridge is fired by which of the following components? 1. The sear link 2. The link stops 3. The hook release rod 4. The hook toggle levers 7-32. When the gas-generating cartridge is fired in an IMER/ITER ejector unit assembly, which of the following movements unlocks the suspension hooks? 1. The aft movement of the breech 2. The aft movement of the hook release rod 3. The downward movement of the cranks 4. Each of the above 7-33. During ejection, the weight of the store, plus gas pressure, forces the suspension hooks of an IMER/ITER ejector unit assembly to open. Which of the following components hold(s) the suspension hooks in the open position? 1. The hook toggle lever 2. The hook toggle spring only 3. The coil spring only 4. The hook toggle spring and the coil spring 7-34. Practice bomb adapters can be used in conjunction with an IMER/ITER ejector unit assembly unit for which of the following purposes? 1. To attach practice bombs 2. To carry aircraft parachutes flares externally 3. To carry marine location markers externally 4. Each of the above 7-35. What maintenance level is 7-36. 7-37. 7-38. responsible for maintaining both the hardware adapter kit and the practice bomb adapters used with an IMER/ITER? 1. Organizational 2. Intermediate 3. Depot 4. Overhaul What is the maximum weight capacity of a Mk 8 Mod 5 shackle? 1. 100 lb 2. 500 lb 3. 1,000 lb 4. 1,500 lb Which, if any, of the following lubricants should be used on a Mk 8 Mod 5 bomb shackle? 1. Silicone 2. Light weapons oil 3. General-purpose grease 4. None of the above The SUU-44 flare dispenser provides the capability for suspending and launching what total number of Mk 45 aircraft parachute flares? 1. Eight 2. Two 3. Six 4. Four 36