Adapter retainer assembly
Technical manual
Figure 16-4.—AN/AWM-42A fuze function control test set.
A battery charger (not shown) is also available, but
you need to order it separately. The AWM-54 test set
weighs about 7.5 pounds. It has a strap you can place
around your waist for carrying the set.
Several accessory adapter assemblies are available
for the test set. These adapters allow you to connect the
test set to various armament configurations found on
different aircraft. Some aircraft require only one or two
adapter assemblies while others require five or six.
These adapters are not furnished with the test set; they
must be ordered separately.
AN/AWM-42A FUZE FUNCTION
CONTROL TEST SET
The AN/AWN-42A fuze function control test set
(fig. 16-4) is used to check the dc fuzing capabilities of
fuze function control circuits. You use it to check for
continuity and resistance in the electric fuzing. The test
set has its own power source. The AN/AWM-42A fuze
function control test set is used on all Navy and Marine
Corps aircraft that have electric fuzing capabilities.
TTU-304/E GUIDED MISSILE
TEST SET
The TTU-304/E guided missile test set (fig. 16-5)
is used during prior-to-launch procedures for
checking the tone and missile lock-on operability
of the guidance control group of the Sidewinder
missile. The TTU-304/E guided missile test set is used
on all Navy aircraft that have Sidewinder missile
capabilities.
Figure 16-5.—TTU-304/E guided missile test set.
16-3
