Front Presser Foot and Presser
Pressure-Regulating
Thumbscrew
Install the foot on the front presser foot and
the regulating screw on the top of the face.
Knee Lifter Lifting Lever
Replace the knee lifter lifting lever so that the
slotted end fits over the projection on the knee
lifter connection lever. The projection on the
curved end of the knee lifter lifting lever fits under
the presser bar releasing bracket.
Knee Lifter Lifting Lever Hinge Screw
Align the hole in the knee lifter lifting lever
with the corresponding hole in the machine
arm; then insert the hinge screw. Make certain the
screw, including the shoulder, is fully inserted.
Faceplate
Insert the thumbscrew and secure it.
Arm Cap
Replace the arm cap and the spring washer on
the machine arm and screw them in place.
This completes the reassembly of the 111 W
155 sewing machine. It will be necessary to make
a few minor adjustments or retime this machine.
T i m i n g a n d a d j u s t m e n t a r e c o v e r e d a t t he
beginning of this chapter.
4-31
