4-59.
A calendar inspection is per-
formed on the rescue harness a
minimum of how often?
4-66.
The hoist quick-splice plate is
used under which of the following
conditions?
1. Every 60 days
2. Every 90 days
3. Every 210 days
4. Every 225 days
1. When the hoist cable is cut
or broken
2. When time is a factor
3. When no other means is
available for rescue
4. All of the above
4-60.
The service life of the rescue
harness is 7 years from the date
it was placed into service, but
it is NOT to extend beyond what
length of time from the date of
fabrication?
4-67.
The cable grip is an emergency
condition device that is capable
of supporting what maximum
weight?
1. 8 1/2 years
2. 9 years
3. 10 years
4. 12 years
1. 1,000 pounds
2. 1,500 pounds
3. 2,000 pounds
4. 2,500 pounds
4-61.
If a service date cannot be
determined, the rescue harness
must be removed from service what
maximum number of years from the
date of manufacture?
4-68.
The pneumatic rescue hand tool
operates on a nitrogen gas
cylinder with a pressure of
1. 1,000 psi
2. 2,000 psi
3. 3,000 psi
4. 3,500 psi
1. 5
2. 7
3. 8 1/2
4. 10
4-69.
The hand tool can cut stainless
steel cable of what maximum
diameter?
4-62.
When you clean the rescue
harness, the water must not
exceed what temperature?
1. 1/8 inch
2. 1/4 inch
3. 5/8 inch
4. 7/32 inch
1. 90°F
2. 100°F
3. 120°F
4. 150°F
4-70.
To pass the trigger force test,
the hand tool trigger force must
be in what range?
4-63.
The large rescue hook will
support how much weight?
1. 1,500 pounds
2. 2,000 pounds
3. 2,500 pounds
4. 3,000 pounds
1. 2 and 5 pounds
2. 5 and 20 pounds
3. 20 and 25 pounds
4. 25 and 27 pounds
4-71.
4-64.
The smaller rescue hook supports
what maximum weight?
After clenaing the hand tool, you
should lightly coat the cutting
edge of the blade with what?
1. 500 pounds
2. 1,000 pounds
3. 2,500 pounds
4. 2,000 pounds
1. Light weight oil
2. Bearing grease
3. Pneumatic grease
4. Heavy weight oil
4-65.
The ring will support what
maximum weight?
1. 500 pounds
2. 1,000 pounds
3. 1,500 pounds
4. 2,000 pounds
26
