Assignment 6
Textbook Assignments:
“Seat Survival Kit,” pages 7-1 through 7-9; and “Carbon
Dioxide,” pages 8-1 through 8-5.
Learning Objective:
Identify,
inspect,
and maintain the RSSK-8
seat survival kit.
6-1.
6-2.
6-3.
6-4.
6-5.
Which portion of the RSSK-8
container houses the emergency
oxygen supply?
1.
The seat cushion
2.
The upper container
3.
The survival kit unit
4.
The lower container
The release handle is located on
which area of the RSSK-8?
1.
The rear left side
2.
The forward left side
3.
The forward right side
4.
The rear right side
Oxygen from the emergency oxygen
system is prevented from flowing
into the aircraft O2 system by
the
1.
aircraft O2 pressure
2.
poppet valve
3.
check valve in the O2 mask
4.
check valve in the O2 line
If the automatic actuation
lanyard falls to actuate the
emergency oxygen system, the
aircrew member can operate it
manually by pulling the
1.
yellow
“O” ring
2.
green knob
3.
green ring
4.
yellow release handle
A hard landing would warrant
which of the following
inspections on a seat kit?
1.
A conditional
2.
An SDLM
3.
A turnaround
4.
A postflight
6-6.
6-7.
6-8.
6-9.
6-10.
Which of the following activities
is responsible for doing a 7- or
14-day inspection on a survival
kit installed in an aircraft?
1.
QA division
2.
Aircraft division
3.
Aviator’s equipment branch
When performing a daily inspec-
tion on an RSSK-8, you discover
the seal decal is torn.
What
action, if any, would you take?
1.
Notify maintenance control
2.
Replace the torn decal
3.
Notify QA
4.
None
On the RSSK-8 survival kit,
similar parts from kits made by
different manufacturers are
interchangeable.
1.
True
2.
False
What is the maximum time that can
elapse between phase inspections
on a seat kit?
1.
91 days
2.
182 days
3.
225 days
4.
231 days
To perform the swaged ball pull
test, the swaged ball should
withstand a pull force of how
many pounds?
1.
50
2.
100
3.
150
4.
200
33
