4-34. Which of the following is NOT a benefit of the tool control program? 1. Reduced tool replacement costs 2. Reduced equipment failures 3. Reduced tool pilferage 4. Assurance  of  tool  availability  to  perform maintenance 4-35. Detailed   information   concerning   the   ALRE TCP can be found in what publication? 1. NAEC Miscellaneous Report 51/OR732 2. NAEC Report No. CD-1025 3. NAVAIR 80R-14 4. OPNAVINST 4790.4B 4-36. The   achievement   of   a   properly   functioning quality  assurance  program  exhibits  which  of the following characteristics? 1. The program is managed by the maintenance  control  officer,  maintenance control   chief,   and   work   center   group supervisors 2. Eliminates    unnecessary    man-hour    and dollar expenses 3. Uses  prevention,  knowledge,  and  special skills 4. Stresses  the  gathering  and  maintaining  of information on quality assurance 4-37. What is the basis of maintenance and operational    decisions    through    the    Quality Assurance (QA) program? 1. Memory 2. Intuition 3. Factual data 4. The maintenance officer's experience 4-38. When  it  becomes  necessary  to  augment  the quality  assurance  branch  with  CDQAIs,  they must be designated in writing by which of the following officers? 1. The commanding officer 2. The air department officer 3. The V-2 division officer 4. The V-2 maintenance officer 4-39. When it is necessary to augment the QA branch with Collateral Duty QA inspectors (CDQAIs) below  the  paygrade  of  E-6  for  more  than  90 days, who must approve the continued augmentation? 1. The maintenance officer 2. The division officer 3. The commanding officer 4. The type commander 4-40. Who   is   most   directly   concerned   with,   and responsible for, quality in workmanship? 1. The maintenance officer 2. The assigned quality assurance inspector 3. The work center supervisor 4. The equipment operator 4-41. Which   of   the   following   duties   is   NOT   a responsibility of the quality assurance branch? 1. To prepare maintenance instructions 2. To provide technical assistance to collateral duty inspectors 3. To manage the dispersed technical publications libraries 4. To develop audit checklists 4-42. CDIs are designated in writing by which of the following officers? 1. The air department officer 2. The executive officer 3. The commanding officer 4. The maintenance officer 4-43. How often are work center audits conducted? 1. Weekly 2. Monthly 3. Quarterly 4. Semi-annually 4-44. What  type  of  audit  is  conducted  to  evaluate  a specific maintenance task? 1. Work center audit 2. Special audit 3. Internal audit 4. Type commander audit 22