7-13. The LALS MHU Series transporter has four hinge plates and four quick-release pins that are used to lock the transporter into what skid? 1. Aero 12 2. MHU-191 3. Mk 7 4. Mk 14 7-14. The   LALS   MHU   Series   ammunition   drum consists  of  two  scoop  disk  assemblies,  two cover assemblies, and what other component? 1. An inner drum 2. An exit unit 3. An entrance unit 4. An inner drum bypass 7-15. The   LALS   MHU   Series   rounds-remaining indicator is located on what component? 1. The outer drum 2. The drum cover 3. The exit unit 4. The entrance unit 7-16. What size hand crank can be used to drive the gearbox   of   a   loader   assembly   MHU   133/ E32K? 1. 3/8 in. 2. 7/16 in. 3. 1/2 in. 4. 3/4 in. 7-17. The   LALS   MHU   Series   drive   assembly   is mounted on brackets that are located on what component? 1. The drum loader 2. The entrance unit 3. The exit drum cover 4. The entrance drum cover 7-18. The LALS MHU Series drum loader assembly consists   of   which   of   the   following   compo- nents? 1. One  load  tray,  one  belt  of  elements,  and one chute 2. One  load  tray,  one  belt  of  elements,  and two chutes 3. One  load  tray,  two  belts  of  elements,  and two chutes 4. Two load trays, two belts of elements, and two chutes 7-19. What LALS MHU Series assembly has a hole for spent cases to drop through? 1. The drum loader assembly 2. The drum unload assembly 3. The conveyer assembly 4. The exit unit assembly 7-20. Which  of  the  following  LALS  MHU  Series assemblies is/are part of the conveyor system? 1. The entrance unit assembly only 2. The exit unit assembly only 3. The chute support assembly only 4. The   entrance   unit   assembly,   exit   unit assembly, and chute support assembly 7-21. What  LALS  MHU  Series  assembly  transfers the rounds coming from the exit unit assembly to the aircraft system? 1. The adapter assembly 2. The entrance unit assembly 3. The exit unit assembly 4. The interface unit assembly 7-22. A LALS MHU Series is designed to operate in which of the following modes? 1. Bypass only 2. Loading/downloading aircraft gun systems only 3. Loading/downloading the transporter 4. Bypass, loading/downloading aircraft gun systems, or loading/downloading the transporter 7-23. The  loading  or  unloading  of  a  LALS  MHU Series  transporter  should  be  conducted  in  a RADHAZ-safe area for which of the following reasons? 1. To   prevent   the   transporter   from   over- heating 2. To prevent the primers from firing 3. To prevent the gun from being accidentally fired 4. To prevent the casings from overheating 7-24. When    loading    or    simultaneously    loading/ unloading, what device should you use to drive the LALS MHU Series transporter? 1. A handcrank 2. A hydraulic drive unit 3. A load unit assembly 4. An electrical drive unit 34