The E-00 lists each aircraft or item of SE
assigned to the reporting custodian. The report
is sorted by organizational code, PUC, TEC,
serial number, and meter (SE only). This report
is used to verify data that is contained in the
master files of the local DSF. (See figs. 4-31 and
4-32 for examples of aircraft and SE master
rosters.) In these rosters, the PUC DATA
ELEMENT IS USED FOR AIRCRAFT ONLY.
The meter data element is used for SE only.
l If corrections to the E-00 are required, the
reporting activity will make such corrections by
submitting proper source documents (VIDS/
MAFs using TRCODE 00, 02, or 03.)
l For correction of PUC (aircraft only),
inventory code corrections are made on the daily
audit report using audit report correction
. For correction to action organization,
transaction code, TEC, bureau/serial number,
time, and date, a NEW transaction must be
submitted and the incorrect transaction deleted.
Frequently, organizational and intermediate
maintenance activities require the help of higher
levels of maintenance. Forms have been developed
to make it easier to get such assistance. The
following sections contain a brief discussion of
each type of work request form currently in use.
Those activities using NALCOMIS, should refer
to the NALCOMIS Users Manual for detailed
procedures for submitting a work request.
VIDS/MAF WORK REQUEST
(OPNAV FORM 4790/60)
The VIDS/MAF work request is used by
supported maintenance and supply activities to
request work or assistance from the supporting
IMA for work that is beyond the capability of the
requesting activity. The VIDS/MAF work request
is used for, but not limited to, the following
l To request check, test, and service of items
removed from an aircraft/equipment/SE for
scheduled maintenance when requested work is
beyond the capability of the requesting activity
NOTE: Work requests for items removed for
check, test, service, and local manufacture/
fabrication must be approved and signed by
the requesting activitys maintenance control
supervisor and the supporting activitys pro-
duction control supervisor.
. To induct items not part of the aircraft
and/or SE that require check, test, and service;
for example, pilots personal equipment, oxygen
masks, life preservers, and parachutes
l To induct components from supply for
check, test, and service
Figure 4-32.Equipment Master Roster (E-00) (SE).