1-28. If you work in electronics, instruments, or armament, you are normally assigned to what division of an organizational-level maintenance department? 1. Aircraft 2. Line 3. Avionics/armament 4. Operations 1-29. In an intermediate-level maintenance activity, what is the central point of the maintenance effort? 1. Maintenance material control 2. Maintenance control 3. Quality assurance 4. Production control 1-30. Normally, the intermediate maintenance organization has a total of how many production divisions? 1. Five 2. Six 3. Three 4. Four 1-31. What system provides organizational and intermediate maintenance activities with a computer-based management information system? 1. NADEP 2. NALCOMIS 3. MDS 4  .   N A V S U P 1-32. Maintenance managers need current status information to control the maintenance effort. What system is designed to provide maintenance managers with this information? 1. NMCS 2 .  P M C S 3 .  V I D S 4 .  F M C S 1-33. The VIDS boards in each work center are verified with the maintenance control VIDS board a minimum of how often? 1. Once each shift change 2. Twice each day 3. Once each day 4. Once each week 1-34. After the personnel in maintenance control complete the required blocks of a newly initiated VIDS/MAF, copies 1 and 5 are forwarded to 1. quality assurance 2. material control 3. production control 4. the work center 1-35. If a check flight is required after the completion of a corrective action, notification must be given to what individual? 1. The quality assurance division officer 2. The material control supervisor 3. The maintenance material control officer 4. The aircraft maintenance officer 1-36. After a discrepancy has been corrected, what should be done with copies 1 and 5 of the VIDS/MAF? 1. 2. 3. 4. Copy 1 should be sent to quality assurance, and copy 5 is placed in the work center files Copy 1 should be sent to maintenance control, and copy 5 is sent to quality assurance Copy 1 should be sent to maintenance control, and copy 5 is placed in the work center files Copy 1 should be placed in the work center tiles, and copy 5 is sent to maintenance control 4