8-25. 8-26. 8-27. 8-28. 8-29. 8-30. 8-31. What minimum number of thermostats should be installed in each magazine? 1. One 2. Two 3. Three 4. Four What minimum number of thermostats should be installed in a magazine that has a deck area of 982 square feet ? 1. One 2. Two 3. Three 4. Four To divide a large magazine area into smaller areas or bins, which of the following equipment is used? 1. Stanchions only 2. Battens only 3. Stanchions and battens 4. Cradles and stanchions When metal pallets are NOT used, ammunition should be stowed by what means? 1. In foam padding 2. On dunnage 3. On the deck 4. In stanchions and battens What minimum amount of air space should be provided between any ammunition stowage stack and the surface of adjacent plating or sheathing? 1. 1 ft 2. 2 ft 3. 2 in. 4. 1 in. When inspecting a magazine, you must have which of the following items? 1. A flashlight 2. A toolbox 3. A thermometer 4. A check sheet The maximum and minimum temperature conditions in a magazine should be observed, recorded, and reported at least how often? 1. Daily 2. Biweekly 3. Weekly 4. Bimonthly 8-32. If the mercury level in each side of a maximum-minimum thermometer tube does NCYI’ indicate the same temperature, which of the following actions should you take? 1. Record the indicated readings 2. Average the two readings and record them 3. Replace the thermometer 4. Adjust the thermometer 8-33. Completed magazine temperature cards should be removed from the magazines and replaced at least how often? 1. The first day of every other week 2. The first day of every other month 3. The last day of every month 4. The first day of every month 8-34. When a completed magazine temperature card is removed from a magazine and the temperatures recorded in a permanent log, the card must be retained on file for at least how many months? 1. 12 months 2. 6 months 3. 3 months 4. 4 months 8-35. When magazine temperatures are recorded in the permanent log, red ink should be used to record the temperatures in excess of what amount ? 1. 100°F 2. 110°F 3. 115°F 4. 120°F 8-36. When the temperature exceeds 110°F in a smokeless powder magazine. the temperature should be checked at least how often? 1. Every hr 2. Every 2 hr 3. Every 3 hr 4. Every 4 hr 8-37. High-security stowage spaces should contain which of the following equipment? 1. An unauthorized entry alarm system only 2. A specially designed locking device only 3. An unauthorized entry alarm system and a specially designed locking device 4. A standard locking device 42