9-14. 9-15. 9-16. 9-17. 9-18. 9-19. Fuzes with two or more safety features are in what storage compatibility group? 1. A 2. c 3. D 4. F Items containing WP or PWP are in what storage compatibility group? 1. H 2. J 3. L 4. s Items filled with lethal or incapacitating chemical agents are in what storage compatibility group? 1. K 2. J 3. B 4. c The storage compatibility groups assigned to ammunition and explosives are approved by what command? 1. NAVSBASYSCOT4 2. NAVAIRSYSCOM 3. NAVAIRPAC 4. NAVAIRLANT A magazine designator consists of the magazine group and sequence numbers, the magazine type, and which of the following items? 1. The magazine model number 2. The magazine initial service date 3. The magazine capacity 4. The magazine serial number In the magazine designator 4XTX4, which of the following numbers or letters indicates the magazine group number? 1. The number 4 in the first position 2. The letters ET in the second and third positions 3. The letters TX in the third and fourth positions 4. The number 4 in the fifth position 9-20. In the magazine designator 4XTX4, which of the following numbers or letters indicates that the magazine is earth-covered and barricaded? 1. The number 4 in the first position 2. The letter X in the second position 3. The letter T in the third position 4. The letter X in the fourth position 9-21. In the magazine designator 5ZS2, what number or letter indicates that the magazine is barricaded but NOT earth-covered? 1. The number 5 2. The letter Z 3. The letter S 4. The number 2 9-22. The Q-D requirements do NOT allow the use of an explosive capacity design for a standard magazine because of insufficient separating distance. What letter is added to the designator to indicate this situation? 1. X only 2. Y only 3. Z only 4. X, Y, or Z 9-23. Magazine symbol-hazard placecards should be mounted at locations that are visible in the daytime from what minimum distance? 1. 500 ft 2. 1,000 ft 3. 1,500 ft 4. 2,000 ft 9-24. Magazine symbol-hazard placecards are used for which of the following purposes? 1. To identify the persons responsible for the hazards involved 2. To help fire fighters determine the types of equipment and procedures to use 3. To identify the work center responsible for the hazards involved 4. To identify a magazine within the magazine group 47