1-11. What will the S illumination on panels indicate radio system? 1. System off indicator the crew control for a particular 2. System available 3. System selected only 4. System secure mode selected 1-12. In the ICCG, which of the following components does NOT have identical binary coding and decoding circuits? 1. SLU 2. IRC 3. LS-601/AI 4. LS-602/AI 1-13. What binary number is recognized by the SLU as the pilot crew ICS panel in bits 2 through 6 of the 36-bit format? 1. 01110 2. 01010 3. 10101 4. 10110 1-14. What is bit 36 of the 36-bit format used for by the   ICCG? 1. 2. 3. 4. 1-15. In is 1. 2. 3. 4. Parity bit Entry bit Tag bit Flag bit the Manchester word format, what the clock pulse rate? 210 MHz 210 kHz 120 MHz 120 kHz 1-16. What component generates the roll call for the communication system? 1. IRC 2. SLU 3. GPDC 4. LS-601/AI 1-17. 1-18. 1-19. 1-20. 1-21. 1-22. The exhale word between the SLU component(s)? 1. IRC only is a status word and which 2. LS-601/AI only 3. GPDC only 4. IRC, LS-601/AI, and GPDC Which components in the ICCG respond to more than one roll call address? 1. IRC and SLU 2. IRC and LS-601/AI 3. SLU and LS-601/AI 4. SLU and LS-602/AI Which ICCG component recognizes and processes the first part of roll call 1 through the digital control section, line receiver, and inhale word register? 1. LS-601/AI 2. LS-602/AI 3. IRC 4. SLU Which ICCG component generates the second part of roll call 1? 1. LS-601/AI 2. LS-602/AI 3. IRC 4. SLU Where are the data and clock pulses separated in the SLU? 1. Digital control section 2. Line receiver 3. Input register 4. Inhale word register What circuit in the SLU is used to shift data from one buffer to another once the data is shifted to the 1. 2. 3. 4. input register in the SLU? Valid word register Inhale word register Master clock Derived clock 2