1-37.
Standard screwdrivers are classified by size
according to the combined length of which of
their following parts?
1.
Shank and blade only
2.
Handle and shank only
3.
Handle and blade only
4.
Handle, shank, and blade
1-38.
How
are
combination
slip-joint
pliers
distinguished from regular slip-joint pliers?
1.
They have an adjustable pivot at the jaws
2.
They are able to hold objects regardless of
their shape
3.
They have a side cutter at the junction of
the jaws
4.
They have dual joints allowing a larger
range of adjustment
1-39.
Which type of pliers may be used as a clamp or
vice?
1.
Slip-joint pliers
2.
Water pump pliers
3.
Wrench pliers
4.
Groove-joint pliers
1-40.
Of the following operations, which one is best
accomplished by using diagonal pliers?
1.
Grasping cylindrical objects
2.
Bending light gauge materials
3.
Cutting small objects flush with the
surface
4.
Straightening bent cotter pins
1-41.
What type of file should be used to sharpen the
serrations on the jaws of pliers?
1.
A dead smooth file
2.
A single cut flat file
3.
A small triangular file
4.
A small tapered square file
1-42.
What is the maximum allowable length of an
electric extension cord used on the flight deck?
1.
25 ft
2.
50 ft
3.
75 ft
4.
100 ft
1-43.
Which of the following pneumatic tools is best
suited for use in scaling an irregular surface?
1.
Rotary scaler
2.
Needle scaler
3.
Shale scaler
4.
Jitterbug scaler
1-44.
Generally, pneumatic impact wrenches operate
most efficiently when the air supplied is in
what pressure range?
1.
50 to 80 psi
2.
80 to 90 psi
3.
80 to 100 psi
4.
100 to 120 psi
1-45.
The term "blueprint reading" is best defined by
which of the following statements?
1.
The reading aloud of the printed matter in
the legends
2.
The reading of related matter to help you
understand the blueprint symbols
3.
The interpretation of the ideas expressed
on drawings
4.
The interpretation of your ideas compared
to the ideas expressed on the drawing
1-46.
In what corner of a blueprint is the revision
block usually found?
1.
Lower left
2.
Lower right
3.
Upper left
4.
Upper right
1-47.
Of the following types of blueprints, which one
would show the various parts of a machine and
how the parts fit together?
1.
Detail print
2.
Plan view
3.
Assembly print
4.
Unit print
1-48.
How should a 12-inch steel rule be held to
obtain an accurate measurement of a surface?
1.
At a slight angle to the surface
2.
With the edge at a slight distance from the
surface
3.
Flat along the surface
4.
With the edge along the surface
4