3-24.
The forward motion of the rotary retraction
engine is stopped at the completion of the grab
advance cycle by what force or device?
1.
By cable dead weight drag
2.
By fluid acting on the carriage assembly
3.
By the advance buffer
4.
By fluid braking of the hydraulic motor
3-25.
What is the function of the rotary retraction
engine maneuvering valve?
1.
To protect the engine from damage in the
event of a malfunction
2.
To control the bridle tensioner control
valve
3.
To control the speed of the grab after
advance or retract stroke braking has been
completed
4.
To initiate the advance and retract stroke
braking
3-26.
Which of the following components operates
hydraulically to keep the retraction engine
cables taut?
1.
The cable tensioner assembly
2.
The screw and traverse carriage assembly
3.
The lead sheave assembly
4.
The cable tensioner sheave assembly
3-27.
Which of the following components guides the
cables between the retraction engine and the
catapult trough?
1.
The cable tensioner assembly
2.
The screw and traverse carriage assembly
3.
The fairlead sheave assembly
4.
The cable tensioner sheave assembly
3-28.
The retraction engine drive system cables are
attached to what component(s)?
1.
The shuttle only
2.
The grab only
3.
The shuttle and launching engine steam
pistons
4.
The grab and launching engine steam
pistons
3-29.
During normal launching operations, when
will the grab release the shuttle?
1.
When endspeed has been reached and the
unlocking mechanism is disengaged
2.
When launch complete is reached and the
locking mechanism is actuated
3.
When both have returned to battery
position and the unlocking mechanism is
actuated
4.
When maximum load drag weight is
reached and the unlocking mechanism
automatically disengages
3-30.
Which of the following controls is NOT a
momentary contact push button?
1.
Fire
2.
Maneuver aft
3.
Lube
4.
Maneuver forward
3-31.
The controls for the integrated catapult control
system (ICCS) are mainly divided between or
among how many control stations?
1.
Five
2.
Two
3.
Three
4.
Four
3-32.
The malfunction and status lights are located
on what panel or console of the ICCS?
1.
The central panel
2.
The cat officer control console
3.
The emergency deckedge control console
4.
The monitor panel
3-33.
What
panel
controls
and
monitors
the
pneumatic system?
1.
The left front panel
2.
The left intermediate front panel
3.
The right intermediate front panel
4.
The right front panel
3-34.
What
panel
controls
and
monitors
the
hydraulic system?
1.
The left front panel
2.
The left intermediate front panel
3.
The right intermediate front panel
4.
The right front panel
15
