Q13-34. How many turns and in what direction must
Q13-28. What is the maximum pressure required to
you turn an air valve swivel nut to release the
retract and lock a landing gear during a drop
strut pressure?
check?
Q13-35. What is the proper torque for installing an air
Q13-29. The force applied to the axle hubs to push a
valve on a shock strut?
landing gear into the down and locked
position should not exceed what force?
Q13-36. In what position does a shock strut need to be
before it can be bled?
Q13-30. What device can be used to detect internal
leakage of a landing gear hydraulic
Q13-37. When should the exposed piston of a shock
component?
strut be cleaned?
Q13-31. Other than normal servicing and removal and
Q13-38. Excessive leaking of fluid from a shock strut
replacement, what other type of maintenance
can usually be fixed by what method?
can be performed on a shock strut at the
Q13-39. What is the first step in disassembling a shock
organizational level?
strut once it is removed from the aircraft?
Q13-32. After the aircraft is on jacks, what is the next
Q13-40. When bench testing a rebuilt shock strut, it
step in removing a shock strut?
must not leak when filled with nitrogen for
Q13-33. What type of air valve is used on most naval
how long?
aircraft?
13-20
