IN ANSWERING QUESTIONS 3-47 THROUGH 3-49,
SELECT FROM COLUMN B THE PANEL THAT
INDICATES THE FUNCTION LISTED IN COLUMN A.
3-47.
3-48.
3-49.
A. FUNCTIONS
Indicates pressures
and temperatures of
various components
Used to control
normal launching
operations
Contains all
lights, switches,
and push buttons
that are found on
the deckedge panel
B. PANELS
1. Emergency
panel
2. Gauge
panel
3. Operating
panel
3-50.
What panel indicates the catapult
readiness to the catapult launching
officer during normal operations?
1.
The gauge panel
2.
The monitor panel
3.
The auxiliary deckedge panel
4.
The operating panel
3-51.
The PRI-FLY control panel indicates
to the air officer the condition of
readiness of which of the following
equipment?
1.
Aircraft
2.
Recovery equipment
3.
Catapults
4.
LSO platform
3-52.
The controls for the integrated
catapult control system (ICCS) are
mainly divided between or among how
many control stations?
1.
Five
2.
Two
3.
Three
4.
Four
3-53.
The malfunction and status lights
are located on what panel or
console of the ICCS?
1.
The central panel
2.
The cat officer control console
3.
The emergency deckedge control
console
4.
The monitor panel
3-54.
The emergency deckedge control
panel of the ICCS is operational
during which of the following
situations?
1.
Normal operations only
2.
Emergency mode II only
3.
Emergency mode I only
4.
At all times
THE CENTRAL CHARGING PANEL IS DIVIDED INTO
FOUR MAIN PANELS, IN ANSWERING QUESTIONS
3-55 THROUGH 3-57, SELECT THE PANEL FROM
COLUMN B THAT MATCHES THE FUNCTION
PERFORMED IN COLUMN A.
3-55.
3-56.
3-57.
A. FUNCTIONS
Controls and
monitors the
pneumatic system
Controls and
monitors the
hydraulic system
Monitors the
various functions
of the catapult
during normal
operations
B. PANELS
1. Left front
panel
2.
Left
intermediate
front panel
3. Right front
panel
3-58.
The exhaust valve closes in what
phase of catapult operation?
1.
2.
3.
4.
3-59.
The
off
the
1.
2.
3.
4.
Final ready
Standby
First ready
Launch complete
low pressure air supply is shut
to what control valve during
firing of no-loads?
The bridle tension valve
The maneuver aft valve
The lubrication valve
The advance valve
3-60.
In addition to the grab being fully
advanced, what other condition(s)
must exist before the retract
permissive light will come on at
deckedge?
1.
The exhaust valve must be open
2.
The deck (bridle) tensioner
must be in
3.
The retract buffer must be out
4.
All of the above
16
