4-23. What authority is responsible for the support of research, design, development, testing, acquisition, and logistic support of all catapult and arresting gear materials and associated equipment? 1. The CNO 2. NAMSO 3. The Naval Air Warfare Center (NAWC) 4. COMNAVAIRSYSCOM 4-24. In the V-2 maintenance organization, who has the authority to certify that maintenance actions have been completed and that the equipment can be returned to an operational status? 1. The division officer or maintenance officer 2. The catapult officer or recovery officer 3. The maintenance officer or maintenance control chief 4. The maintenance officer only 4-25. Which of the following personnel are responsible for the day-to-day operations of the work center, the nomination of qualified personnel to be collateral duty inspectors, and the assignment of work center personnel to specific maintenance tasks? 1. The maintenance officer, work center group supervisors, and work center supervisors 2. Work center group supervisors and work center supervisors only 3. Work center group supervisors, the QA work center supervisor, and the maintenance support work center supervisor 4. The maintenance officer, the maintenance control chief, and work center group supervisors 4-26. Which of the following VIDS boards provides information pertaining to the divisions’s overall maintenance status? 4-27. 4-28. 4-29. 4-30. A total of how many information display columns are required on both the maintenance control and all other work center VIDS boards? 1. Seven 2. Six 3. Five 4. Four For what reason(s) must a casualty report (CASREP) be submitted for jobs that are displayed in either the AWM or AWP columns of a VIDs board? 1. To report that maintenance cannot be performed or completed due to operational commitments or time restraints 2. To report that maintenance or repair cannot be made or completed due to a lack of maintenance capability or non- availability of parts or material 3. To report that maintenance has been completed and inspected and that only a functional test remains to be performed 4. To report that all division maintenance has been completed and that all equipment is operational What color is used to indicate limited capability on the Maintenance Action Form (MAF) cards? 1. Blue 2. Red 3. Black 4. Yellow On the MAF card,    what color is used to indicate commission? 1. Yellow 2. Red 3. Black 4. Blue the equipment is out of 1. The maintenance support work center board 2. The Quality Assurance work center board 3. The maintenance control work center board 4. The material control work center board 21