ASSIGNMENT 6
Textbook Assignment: “Ashore Systems and Operations (continued),” and “Administration,”
chapters 7 and 8, pages 7-8 through 8-10.
6-1.
Aircraft direct refueling systems
are normally used for what
function?
1. To defuel aircraft
2. To fuel support equipment
3. To hot refuel aircraft
4. To fill refueler trucks
6-2.
Mobile refuelers are normally used
for what function?
1.
To hot refuel aircraft
2.
To act as a recovery system
3.
To cold-refuel aircraft
4.
To load barges
6-3.
The bottom loading equipment of a
mobile aircraft refueler must be
capable of receiving at least how
many gallons per minute?
1.
300 gpm
2.
600 gpm
3.
900 gpm
4.
1,200 gpm
6-4.
Vehicles used for fueling aircraft
must have how many fire
extinguishers installed?
1.
One
2. Two
3.
Three
4.
Four
6-5.
6-6.
6-7.
6-8.
6-9.
Which of the following markings is
used to identify a refuel and
defuel truck?
1.
JP-4 Jet Fuel F-40
2.
JP-5 Jet Fuel F-44
3.
Contaminated
4.
Jet Fuel/JP
Refueler/defuelers and defuelers
have a maximum defuel rate of
1.
50 gpm
2.
75 gpm
3.
100 gpm
4.
1,000 gpm
In a refueler and defueler, the
hose evacuation system is used for
defueling.
1.
True
2.
False
Daily checks on aircraft fueling
equipment are good for a maximum of
how many hours?
1.
12
2.
24
3.
3
4.
4
During the daily inspection of a
refueler, water is found when the
low points are trained. What
action should you take?
1.
Notify the air operations
officer and have all aircraft
fueled with that refueler
recalled
2.
Flush the refueler
3.
Redrain the low points until a
clear sample is obtained
4.
Reclassify the fuel as
contaminated
38
