6-28.
What is the time requirement before a QA
stamp may be reassigned?
1.
12 months
2.
9 months
3.
3 months
4.
6 months
6-29.
If QA appears on an MRC, what person
performs the inspection?
-1.
The CDI in the work center
2.
The QAR in the work center
3.
Either 1 or 2 above, depending on the
workload
4.
The QAR, CDQAR, or CDI that is
annotated on the master and work
center decks
6-30.
In an organizational maintenance activity, a
final inspection by a QAR/CDQAR is
required for which of the following
situations?
1.
A task that requires a functional check
flight
2.
A task that will require in-flight
maintenance
3.
A task that requires a toolbox to be
checked before starting
4.
A task that the work center supervisor
has never performed
6-31.
During in-flight maintenance, what person
is authorized to sign as inspector if a
designated QA inspector is not available?
1.
The senior aircrew maintenance person
2.
The flight engineer
3.
The pilot
4.
The person who performed the
maintenance
6-32.
After an in-flight discrepancy has been
signed off, what other inspection, if any, is
required when the aircraft has returned to
home base?
1.
A CDI must inspect the aircraft
2.
The QA supervisor must inspect the
aircraft
3.
A QAR must inspect the repairs if the
discrepancy involves safety of flight
4. None
6-33.
Which of the following is NOT a
management responsibility of the QA
division?
1. QA audits
2. Technical publications
3. Tool Control Program
4.
Maintenance department safety
6-34.
Work center audits are conducted at what
minimum intervals?
1. Monthly
2. Quarterly
3. Semiannually
4. Annually
6-35.
Upon completion of an audit, a report of the
findings is submitted to the cognizant
division and what official?
1.
The administration officer
2.
The QA officer
3. The AMO
4. The MMCO
6-36.
Audits are maintained on file for what
minimum period of time?
1. 6 months
2. 1 year
3.
18 months
4. Until the next audit is completed
41
