2-19.
2-20.
2-21.
2-22.
2-23.
2-24.
When you test the Model 7000
actuator, how many firing checks
are made?
1.
One
2.
Two
3.
Three
4.
Four
What color lacquer is used for
the tamper dot on the locking
screw?
1.
Red
2.
Green
3.
White
4.
Orange
Learning Objective:
Recognize
design requirements and component
functions of the ballistic
spreading gun, and identify
procedures pertinent to
maintaining, inspecting, and
changing the cartridges.
The spreader gun consists of how
many slugs, pistons, and
retainers?
1.
7
2.
14
3.
21
4.
28
How is the cartridge installed in
a spreader gun?
1.
Threaded into the breech
2.
Loaded into the barrel
assembly
3.
Loaded into a piston
4.
Threaded into a piston
What prevents accidental firing
of the cartridge during handling?
1.
A safety lanyard
2.
A safety cable
3.
A safety pin
4.
A safety lock
What holds the two lines and loop
in the channels of each slug?
1.
A rubber band
2.
A safety tie
3.
A rock washer
4.
A cover plate
2-25.
2-26.
2-27.
When the cartridge fires, the
slugs are propelld outward how
many degrees?
1.
360
2.
180
3.
90
4.
45
At a high-speed ejection, the
spreading action of the slugs
forms what size diameter mouth at
the skirt hem?
1.
10 feet
2.
8 feet
3.
6 feet
4.
4 feet
At a low-speed ejection, the
spreading action of the slugs
forms what size diameter mouth at
the skirt hem?
1.
10 feet
2.
8 feet
3.
6 feet
4.
4 feet
2-28.
After the firing pin is
withdrawn, the firing lanyard
exerts how many pounds of tension
on the fail-safe assembly sleeve?
1.
15 to 24 pounds
2.
24 to 35 pounds
3.
25 to 38 pounds
4.
30 to 45 pounds
2-29.
If the date the sealed container
was opened is not available, the
installed life of the cartridge
is computed from the date of
manufacture as determined from
the lot number.
1.
True
2.
False
2-30.
The spreader gun cartridge is
treated as what class ammunition?
1. A
2. B
3. C
4. D
2-31.
The lanyard retaining pin must be
removed when replacing the upper
retaining cord.
True
2.
False
1.
9
