ASSIGNMENT 4 Textbook Assignment: “Maintenance Control and Production Control” and “Maintenance Data System (MDS).” Pages 4-1 through 5-45. THIS ASSIGNMENT IS A REVIEW OF CHAPTERS 4 AND 5 OF THE TEXTBOOK. IN ANSWERING THE QUESTIONS, REFER TO THE SITUATION DESCRIBED IN THE FIGURES IN THIS ASSIGNMENT, THE APPROPRIATE CHAPTER IN THE TEXTBOOK, AND TO REFERENCES DISCUSSED IN THE TEXTBOOK. QUESTIONS DO NOT FOLLOW TEXTBOOK ORDER. You are attached to Sea Control Squadron 103 (VS- 103) that is stationed at NAS East Coast. Your squadron flies the S-3 Viking and consists of 10 aircraft. You are assigned to maintenance control. Your duties include, but are not limited to: initiating maintenance action forms (MAFs); maintaining general aircraft files and aircraft discrepancy books (ADBs); providing input and preparation of the monthly maintenance plan, monthly maintenance summary (3M), aircraft summary data report (RECTYP 79 message), and the aircraft material readiness report; maintaining support equipment records; and researching and extracting data from maintenance, material, and flight data reports. Figure 4-A IN ANSWERING QUESTIONS IN THIS ASSIGNMENT, REFER TO THE INFORMATION IN FIGURE 4-A, INFORMATION IN THE TEXTBOOK, AND REFERENCES DISCUSSED IN THE TEXTBOOK. Aircraft 160145 just returned from flight and has a blown mainmount. It will also need a hard landing inspection. Airframes will go in work on the discrepancies at 1300. Figure 4-B IN ANSWERING QUESTIONS 4-1 THROUGH 4-13, REFER TO THE INFORMATION IN FIGURE 4-B, INFORMATION IN THE TEXTBOOK, AND INFORMATION IN REFERENCES DISCUSSED IN THE TEXTBOOK. 4-1. 4-2. 4-3. What work center should assign the work center and the priority to perform the required maintenance on aircraft 160145? 1. Quality Assurance 2. Airframes 3. Maintenance Control 4. Material Control When operating NALCOMIS OMA to initiate a MAF, what specific menu should you go to, to select the type of MAF to initiate? 1. Main menu 2. Initiate maintenance action menu 3. Maintenance menu 4. Update MAF menu Maintenance control approves the MAF, assigns a JCN, and prints two copies of the MAF. What is the disposition of the two copies? 1. One copy is routed to QA, the second copy is sent to Airframes 2. One copy is routed to the maintenance technician, the second copy is sent to the maintenance chief 3. One copy is routed to Airframes, the second copy is placed on the right side of the ADB 4. One copy is placed on the left side of the ADB, the second copy is routed to Airframes 29