c.
Type Commander (TYCOM).
d.
Unit (ship's hull number, UIC, and name).
Shore activity (UIC number).
e.
Workcenter.
f.
MIP number.
g.
Nomenclature (brief description of the
system/equipment).
h.
Equipment status code.
3.
Maintenance Index Pages (MIP): MIPs are
prepared and issued for each installed system
or piece of equipment for which PMS support
has been established. MIPs are basic PMS
reference documents. Each MIP is an index of
a complete set of MRCs applicable to a ship
system, subsystem, and equipment. MIPs (fig.
7-2) contain the following information:
7-3
SHIP SYSTEM, SYSTEM, SUBSYSTEM, OR EQUIPMENT
Fire Extinguishing System, Fog, Foam, and AFFF
5551
REFERENCE PUBLICATIONS
NAVSEA S8225-GY-MMA-010
NAVSEA S9555-AN-MMO-010
DATE
May 2000
A scheduling aid; Review maintenance requirements. Omit
MRC(s) which do not apply; no feedback report required.
# Mandatory scheduling required.
1. Inspect high-capacity AFFF injection station.
1. Inspect proportioner station FP-180.
1. Turn AFFF proportioner shaft by hand.
2. Inspect oil level in AFFF proportioner.
1. Inspect high capacity AFFF injection station operation.
2. Test AFFF concentrate for seawater contamination.
1. Test operate, inspect, and clean 1000 gpm AFFF
proportioner station.
1. Test AFFF concentrate for seawater contamination at
FP-180 station.
1. Clean and inspect hose reel stations.
1. Lubricate AFFF injection pump bearings.
1. Test operate, inspect, and clean AFFF FP-180 station.
2. Lubricate FP-180 proportioner.
NOTE:
Accomplish quarterly or after each use,
whichever occurs first.
1. Accomplish liquid foam quantitative analysis at FP-180
stations.
1. Change oil in AFFF injection station reducer.
1. Inspect AFFF bilge sprinkling system nozzles.
1. Accomplish AFFF concentration analysis
1. Lubricate high-capacity AFFF injection station flexible
couplings.
1. Inspect and hydrostatically test AFFF station hose(s)..
46 6UMU N
42 8UNR N
42 8UNQ N
B4 6UMV N
80 6DAA N
16 6DAD N
88 8DRU N
44 6UMW N
54 C1TH N
97 8GMG N
44 6UMY N
38 8HQR N
39 6UMZ N
44 6UNA N
10 8NPR N
D-1
D-2
W-1
Q-1
Q-2
Q-3
Q-4
Q-5
Q-6R
S-2
S-3
S-4
A-1
A-2
A-3
HT2
HT2
HT/DC3
HT3
FN
HT/DC3
FN
HT3
HT/DC3
HT3
EM3
HT/DC3
FN
DCA
HT1
HG3
HT3
HT/DC
HTFN/
DCFN
HT/DC
HG/DC2
HT3
HT/DC2
2FN
0.2
0.2
0.4
2.0
0.5
2.0
0.5
2.0
0.5
0.3
0.3
2.0
0.5
0.7
0.4
0.4
1.0
1.0
0.7
0.4
0.8
0.3
0.6
None
None
None
None
None
None
None
Q-1
None
D-2#
Q-3#
Q-4#
or
R-1#
None
None
D-1#
Q-1#
Q-4#
or
R-1#
None
None
4
4
4
4
MAINTENANCE REQUIREMENT DESCRIPTION
SYSCOM MRC
CONTROL NO
O
T
H
E
R
T
E
S
T
PERIO-
DICITY
CODE
RATES
MAN
HOURS
RELATED
MAINT-
ENANCE
DISTRIBUTION STATEMENT D
Distribution authorized to DOD components and DOD contractors only; critical technology; May 1994. Other requests for this
document shall be referred to Naval Sea Systems Command (SEA 04TD). Destroy by any method that will prevent disclosure of
contents or reconstruction of the document.
MAINTENANCE INDEX PAGE (MIP)
OPNAV 4790/85 (REV.2-82)
PAGE 1 OF 2
SYSCOM MIP CONTROL NUMBER 5551/011-54
ABEf0702
Figure 7-2.—Maintenance Index Page (MIP).
