Figure 6-25.-Bulkhead-mount & electronics enclosure (BMEE).
Let's take a brief look at how these electronics
Bulkhead-Mounted Electronics Enclosure
interface with each other and with the propulsion
control system.
The BMEE is located in the EOS. The exterior
and interior views of this unit are shown if figure 6-
25. The BMEE contains the following gas turbine
The PLA actuator, which is mounted on
electronics that interface with the propulsion control
the main fuel control of the GTE, receives
system:
signals from the BMEE torque computer
electronics. A voltage booster, which is
1. Power lever angle (PLA) actuator electronics
mounted on the aft bulkhead of the EOS
below the BMEE, maintains the ship's +28 V
2. Torque computer electronics
dc input at a constant potential under loads
3. Speed and acceleration electronics
to 30 amperes. The ship's +28 V dc feeds the
BMEE, FECS, and FPCS panels from a
4. Overspeed switch electronics
circuit breaker located on either one of the
two dc distribution panels.
5. Start/stop sequencer electronics