Figure 16-25.--Typical throwboard used for rigging rudder and rudder tab controls.
1.
Aft control stick
8.
Bobweight
15.
Center line-stick neutral
2.
Stop bolts
9.
Turnbuckles
16.
Stick throw limit-UP elevator
3.
Push-pull tube adjustment
10.
Push-pull tubes
17.
Stick throw limit-DOWN elevator
4.
Bell crank
11.
Aft sector
18.
Stick throw range-elevator control
5.
Rig pins (3 places)
12.
Elevator fitting assembly
19.
Locating angle-vertical reference line
6.
Bungee
13.
Rigging dimension
20.
Longitudinal reference line (cockpit
floor)
7.
Forward sector
14.
Vertical references line
Figure 16-26.--Typical elevator flight control system.
16-30