Figure 1-13.--MGTE Selected Component Record Card.
removal record for all equipment accessories and
D i s c Assembly Service Record and the MGTE
components that require selected component record
(SCR) cards. When a selected component is replaced,
turbine rotor disc assembly is to be reworked, the rework
the removal data for the removed component and
activity must ensure that data associated with each disc
installation data for the new component is entered in this
is properly recorded. The same requirement is true if the
record.
compressor rotor assembly is reworked. Although one
MGTE Selected Component Record Card.-- For
record is required for each turbine rotor disc or stage$
any equipment item, the continuity of historical data is
only one record is required for the complete compressor
essential. The MGTE Selected Component Record
rotor assembly.
(SCR) Card, shown in figure 1-13, provides for the
recording of installation and removal data, TD status,
DIESEL ENGINE RECORDS.-- As a GSE2 on
and repair/rework historyon selected accessories and
board an FFG-7 class ship, you can expect to review
components. When a component is removed from the
diesel engine records. The repair and history records are
equipment, the corresponding SCR card is removed
primarily for the operating personnel of the ship. They
f r o m the MGTESR. This procedure ensures the
will prove valuable in making estimates of parts needed
and work lists for the next availability.
A system must
Supplemental Records.-- The two supplemental
be setup by which completely accurate and up-to-date
r e c o r d s required in the MGTESR are shown in
figure 1-14. These records are the MGTE Turbine Rotor
records can be kept on all diesel engines.
1-14