Aircrew personal protective equipment— Continued types of flight clothing, 4-3 to 4-12 antiexposure assemblies, 4-6 to 4-12 A/P22P-6(V)2 and A/P22P- 6A(V)2 antiexposure assemblies, 4-8 to 4-12 fire-resistant flyer’s gloves, GS/FRP-2, 4-4 to 4-5 configuration, 4-4 to 4-5 fitting, 4-5 maintenance, 4-5 flyer’s boot, 4-5 configuration, 4-5 to 4-6 fitting, 4-6 maintenance, 4-6 summer flyer’s coverall CWU-27/P and blue flyer’s coverall CWU-73/P, 4-3 to 4-4 configuration, 4-4 fitting, 4-4 maintenance, 4-4 SV-2 survival vest, 4-6 configuration, 4-6 fittings, 4-6 AN/PRC-63 radio set, 5-5 to 5-7 AN/PRC-90 radio set, 5-7 to 5-10 AN/PRT-5 transmitting set, 5-11 to 5-12 Automatic opening devices, 2-1 to 2-15 automatic parachute actuators, 2-1 to 2-9 arming and assembling the automatic parachute ripcord release, 2-7 to 2-8 . automatic parachute ripcord release test set, 2-5 to 2-6 checkout of armed ripcord release, 2-8 to 2-9 disarming, 2-3 firing altitude check, 2-5 function, 2-2 inspection, 2-4 to 2-5 maintenance, 2-3 preparation for use, 2-2 ripCord release test procedure, 2-6 to 2-7 ballistic spreading gun assembly, 2-9 to 2-15 ballistic spreading gun cartridge replacement and pull-force check, 2-12 to 2-15 description, 2-10 to 2-11 identification and handling, 2-11 log entries, 2-11 safety precautions, 2-11 service life, 2-11 Automatic opening devices—Continued ballistic spreading gun assembly— Continued operation, 2-11 removal of ballistic spreading gun, 2-12 Automatic parachute ripcord release assembly, installation of, 3-10 to 3-11 Awl, hand tool, 10-12 B Ballistic spreading gun assembly, 2-9 to 2-15 Ballistic spreading gun inspection, 1-28 Beacon set radio, AN/URT-33A, 5-10 to 5-11 Bell jar, 11-14 to 11-15 Binder’s knot, 10-29 Bowline knot, 10-29 C Cable grip, 5-21 to 5-22 Calendar inspection, 12-26 to 12-33 bench test, 12-27 capacitance test (empty), 12-28 capacitance test (full), 12-30 to 12-31 converter assembly purge, 12-27 to 12-28 converter charge, 12-32 to 12-33 converter leakage test, 12-29 to 12-30 evaporation loss test (buildup and supply mode), 12-31 evaporation loss test (vented mode), 12-31 to 12-32 fill and buildup time test, 12-30 flow test, 12-32 insulation resistance test (empty), 12-28 relief valve test, 12-28 to 12-29 service life, 12-27 visual inspection, 12-27 Calendar/phased/SDLM inspections, 12-9 to 12-18 bench test, 12-9 inward leakage test, 12-9 to 12-18 service life, 12-9 Canopies, 1-6 to 1-10 Canopy damage charts, parachutes, 1-21 to 1-22 Carbon dioxide, 8-1 to 8-5 CO₂ recharge equipment, 8-1 to 8-2 CO₂ supply cylinders, 8-2 INDEX-2