resin, and apply the contoured pieces of
resin-impregnated cloth, as shown in view C of
figure 14-8. Tape a sheet of cellophane over the
built-up repair and work out the excess resin and air
bubbles. Cure the repair in accordance with the resin
manufacturer’s instructions, and then sand the surface
down (if necessary) to the original susrface of the
facing.
PLY DAMAGE (SOLID LAMINATES).—Ply
damage to solid laminates may be repaired by using
the scarfed method described for sandwich-type
Figure 14-9.—Repair of solid laminates (stepped method).
14-8
